Close filters
 
  •  
No results were found for the filter!
Makeblock-Plastic Timing Pulley 18T (Pair) Makeblock-Plastic Timing Pulley 18T (Pair)
Makeblock-Plastic Timing Pulley 18T (Pair)

Stock: 0

This product is not available at the moment. Delivery time upon request.

Makeblock-Plastic Gear 8T(4-Pack) Makeblock-Plastic Gear 8T(4-Pack)
Makeblock-Plastic Gear 8T(4-Pack) Was ist ein Kunststoffgetriebe 8T? Plastic Gear 8T ist eine Art von Zahnradantrieben. Es funktioniert in der Regel mit einer Motorwelle als Antriebsmechanismus. Zwischen Kunststoffzahnrad 8T und...

Stock: 0

Voraussichtlich wieder lieferbar ab 3 April 2020

Makeblock-Plastic Gear 72T(Pair) Makeblock-Plastic Gear 72T(Pair)
Makeblock-Plastic Gear 72T(Pair)

Stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Makeblock-Track With Track Axle(40-Pack) Makeblock-Track With Track Axle(40-Pack)
Features: Made of silicon. Can be spliced into any length. Track Axle included. Sold in pack of 40. Size Charts (mm): Demo:

Stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Makeblock-Nylon Pulley with bearing(4-Pack) Makeblock-Nylon Pulley with bearing(4-Pack)
Description: This Nylon pulley can be used for smooth linear motion on the 8mm width parts.It has a 8mm width groove that can exactly fit our 8mm width beams or rods.Each pulley need 2 Non-Flanged Ball Bearings. Features: • Light Nylon...

Stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Makeblock-Female Rod End Bearing 4mm(3-Pack) Makeblock-Female Rod End Bearing 4mm(3-Pack)
Description: A rod end bearing, also known as a heim joint (N. America) or rose joint (U.K. and elsewhere), is a mechanical articulating joint. Such joints are used on the ends of control rods, steering links, tie rods, or anywhere a...

Stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Makeblock-8mm Bearing Bracket A Makeblock-8mm Bearing Bracket A
Description: 8mm bearing bracket A has a ball bearing for 8mm shafts, it is usually used as the bracket of 8mm shafts to support heavy mechanisms. With some M4 tapped holes and though holes, you can easily attact it to Makeblock...

Stock: 0

This product is not available at the moment. Delivery time upon request.

Makeblock-Plain Ball Bearing 4*8*3mm(10-Pack) Makeblock-Plain Ball Bearing 4*8*3mm(10-Pack)
Features: • Perfect for adding to 4mm shaft. • Makes the rotating part virtually friction-free. • Diameters: 4mm (inside), 8mm (outside). • Sold in pack of 10. Size Charts(mm): Demo:

Stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Makeblock-Plain Ball Bearing 8*16*5mm(Pair) Makeblock-Plain Ball Bearing 8*16*5mm(Pair)
Description: Makeblock plain ball bearing 8*16*5mm can be used with Makeblock 8mm bearing bracket A to support heavy mechanisms. Features: • Perfect for adding to 8mm shaft and 8mm bearing bracket A. • Makes the rotating part virtually...

Stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Makeblock-Flange Bearing 4*8*3mm(10-Pack) Makeblock-Flange Bearing 4*8*3mm(10-Pack)
Features: • Perfect for adding to Timing Pulley 66T , Timing Pulley 90T, and Bracket P3. • Makes the rotating part virtually friction-free. • Diameters: 4mm (inside), 8mm (outside) • Sold in pack of 10. Size Charts(mm): Demo:

Stock: 0

This product is not available at the moment. Delivery time upon request.

EOL
Makeblock-Flange Bearing 22*6*7mm (Pair) Makeblock-Flange Bearing 22*6*7mm (Pair)
Makeblock flange bearings are perfect for adding to 42BYG Stepper Motor Bracket. Features: • Makes the rotating part virtually friction-free. • Diameters: 6mm (inside), 22mm (outside) • Sold in pack of 2. Size Charts(mm): Demo:

Stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Makeblock-F688ZZ 8x16x5 Flange Bearing (4-Pack) Makeblock-F688ZZ 8x16x5 Flange Bearing (4-Pack)
8x16x5 flange bearing can operate with 8mm of shaft. It can be mounted to the part of 16mm hole, e.g. U-shaped rack C. Features: Used with with 8mm shaft. Specifications: Type: Bearing Material: steel Thickness: 5 mm Outer diameter: 16...

Stock: 0

This product is not available at the moment. Delivery time upon request.

Makeblock-V-slot Bearing(4-Pack) Makeblock-V-slot Bearing(4-Pack)
Features: • Perfect for adding to the Makeblock slider. • Makes the sliding systerm virtually friction-free. • Diameters: 4mm (inside), 13mm (outside). • Sold in pack of 4. Size Charts(mm): Demo:

Stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Makeblock-Plane Bearing Turntable D34x24mm Makeblock-Plane Bearing Turntable D34x24mm
Description: Makeblock plane bearing turntable can be used as motion joint or rotatable turntable in the high load and high precision designs. It has plane bearing for motion stability and smoothing. It also can be used in Makeblock...

Stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Makeblock-Flange Copper Sleeve 4*8*3mm(10-Pack) Makeblock-Flange Copper Sleeve 4*8*3mm(10-Pack)
Makeblock Flange Copper Sleeve (4 x 8 x 3mm) has inner diameter of 4mm, outer diameter of 8mm, length of 3mm, and flange diameter of 10mm. Flange copper sleeve is brass-made and has features of high accuracy, smoothness, wear resistance,...

Stock: 0

This product is not available at the moment. Delivery time upon request.

Viewed