Close filters
 
  •  
No results were found for the filter!
Makeblock-Hard Circle Shaft 4x56mm-3 Makeblock-Hard Circle Shaft 4x56mm-3
What Is Hard Circle Shaft? This Hard Circle Shaft is made of 45 steel and is of 56mm length. It can be used as the revolving shaft of a rotational joint. You can install an angle sensor on one end to detect the angle of the rotational...

Stock: 0

This product is not available at the moment. Delivery time upon request.

Makeblock-D Shaft 4*56mm(4-Pack) Makeblock-D Shaft 4*56mm(4-Pack)
Size Charts(mm): Demo:

Stock: 0

This product is not available at the moment. Delivery time upon request.

Makeblock-D Shaft 4*128mm  Makeblock-D Shaft 4*128mm 
Description: D Shaft 4×128mm is usually used as a shaft by mating with a gear, pulley, a shaft coupler or some bearings. Made from stainless steel material, it is very hard and has a flat edge. SizeChart(mm):

Stock: 0

This product is not available at the moment. Delivery time upon request.

Makeblock-D Shaft 4*160mm (4-Pack) Makeblock-D Shaft 4*160mm (4-Pack)
Size Charts(mm): Demo:

Stock: 0

This product is not available at the moment. Delivery time upon request.

Makeblock-Linear Motion Shaft 4*288mm (4-Pack) Makeblock-Linear Motion Shaft 4*288mm (4-Pack)
Features: Made of tainless Steel Can drill into 4mm holes. Compatible with Thread Drive Beam Lengh: 288mm Sold in 4-Pack. Size Charts(mm):

Stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Makeblock-Linear Motion Shaft D4*80mm(Pair) Makeblock-Linear Motion Shaft D4*80mm(Pair)
Features: Made of tainless steel. Can drill into 4mm holes. Compatible with thread drive beam. Lengh: 80mm Sold in pack of 2. Size Charts(mm):

Stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

EOL
Makeblock-Linear Motion Shaft D8*96mm Makeblock-Linear Motion Shaft D8*96mm
Description: This linear motion shaft of 8 mm in diameter and 96mm in length is suitable for using as shaft or supporting part. It is made from high-carbon steel and chrome plated for corrosion resistance, case hardened for wear...

Stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Makeblock-Linear Motion Shaft D8*96mm-H Makeblock-Linear Motion Shaft D8*96mm-H
Description: This linear motion shaft of 8 mm in diameter and 96mm in length is suitable for using as shaft or supporting part. It is made from high-carbon steel and chrome plated for corrosion resistance, case hardened for wear...

Stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Makeblock-Linear Motion Shaft D8*128mm-H Makeblock-Linear Motion Shaft D8*128mm-H
Description: This shaft of 8 mm in diameter and 128mm in length is suitable for using as shaft, supporting part, or using with slide units in linear motion applications. It is made from high-carbon steel and chrome plated for corrosion...

Stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Makeblock-Linear Motion Shaft D4*240mm Makeblock-Linear Motion Shaft D4*240mm
Features: Made of tainless steel. Can drill into 4mm holes. Compatible with thread drive beam. Lengh: 240mm Size Charts(mm):

Stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Makeblock-Linear Motion Shaft D8*272mm-H Makeblock-Linear Motion Shaft D8*272mm-H
Description: This shaft of 8 mm in diameter and 272mm in length is suitable for using as shaft, supporting part, or using with slide units in linear motion applications. It is made from high-carbon steel and chrome plated for corrosion...

Stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Makeblock-Linear Motion Shaft D8*496mm-H Makeblock-Linear Motion Shaft D8*496mm-H
Description: This linear motion shaft of 8 mm in diameter and 496 mm in length is chrome plated and case hardened, and is suitable for use with slide units in linear motion applications. The high-carbon steel shaft is chrome plated for...

Stock: 0

This product is not available at the moment. Delivery time upon request.

Makeblock-Linear Motion Shaft D8*312mm-H Makeblock-Linear Motion Shaft D8*312mm-H
Description: This linear motion shaft of 8 mm in diameter and 312 mm in length is chrome plated and case hardened, and is suitable for use with slide units in linear motion applications. The high-carbon steel shaft is chrome plated for...

Stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Makeblock-D Shaft D8x96mm (2-Pack) Makeblock-D Shaft D8x96mm (2-Pack)
The thread D-shaped shaft can stay firm by many ways and other parts for transmission of rotating motion, e.g. wheel, gear, sprocket, etc. Features: 8mm of diameter, capable of bearing high pressure; It can stay firm with sprocket, wheel...

Stock: 0

This product is not available at the moment. Delivery time upon request.

Makeblock-Threaded Shaft 4*39mm(4-Pack) Makeblock-Threaded Shaft 4*39mm(4-Pack)
Size Charts(mm): Demo:

Stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Viewed