ALLNET ISP Bridge Modem g.fast 106MHz in Mini-GBIC SFP form

ALLNET ISP Bridge Modem g.fast 106MHz in Mini-GBIC SFP form
ALLNET ISP Bridge Modem g.fast 106MHz in Mini-GBIC SFP form
   
product pictures similar, may differ from the product description!

net price plus shipping costs

Arriving soon. Delivery Date unknown

Highlights: Compliant with ITU G.fast standards G.9700 and G.9701 ONLY 106MHz Max 1Gbps... more
Product information "ALLNET ISP Bridge Modem g.fast 106MHz in Mini-GBIC SFP form"

Highlights:

  • Compliant with ITU G.fast standards G.9700 and G.9701 ONLY 106MHz
  • Max 1Gbps speed over existing copper wire
  • Low power dissipation design
  • Wide operating temperature
  • Compact design for smart CPE migration

ALL4783-g.fast-SFP is a compact G.fast SFP (Small Form-factor Pluggable) modem with electrical interface specified by a MSA (Multi-Source Agreement) that can be integrated with any switch/router platform and end devices. ALL4783-g.fast-SFP G.fast SFP modem complies with the ITU-T G.9701/ G.9700 G.fast standard which can deliver data rate up to 1Gbps. This G.fast SFP can be easily plugged into any CPE Gateway which has a SFP cage on board. In order to be recognized by the host device after inserting to SFP slot, ALLNET ALL4783 G.fast SFP follows SFF-8472 first 128 byte format and let Host to read these 128 bytes information prior to loading the program into SFP device through 2-wire I2C interface.

ALL4783-g.fast-SFP has an ultra-low power dissipation design in a small form factor SFP package and it can co-exist with legacy xDSL deployments using programmable bandwidth and PSD which allows Service Providers to offer different access technology within One Box. Realizing the modulation of broadband access technology will help ISPs prevent any possible increase on the management cost. On the other hand, using the same user interface will make the upgrade easier and more attractive to end users.

ALL4783-g.fast-SFP completes the One Box solution for broadband access which enables users to upgrade their existing Home Gateways to Gigabit speed without paying for the expensive hardware upgrades. Leveraging ALLNET xDSL SFP modules will be the most cost-efficient solution for ISPs to upgrade their network service.

Supports G.fast Standard ITU-T G.994.1, G.9700, G.9701 Fits in standard 1Gbps SFP slot (no SFP+) of routers or switches (slot must be able to deliver enough power and heat dissipation must be guaranteed) 1Gbps net data rate possible (UP/DOWN stream combined) Note: Not backward compatible to VDSL2 or ADSL g.fast frequency band up to 106MHz, Compatible with ZTE 9852G DSLAM in 106MHz mode

Notice:

  • Not backward compatible to VDSL2 or ADSL
  • g.fast frequency band up to 106MHz
  • Compatible with ZTE 9852G DSLAM in 106MHz mode
  • Not compatible with ALL-BM310 g.fast Master Modem

Key Features:

G.fast Features

OAM Features

Advanced ITU Features

Frequency band

2.2MHz to 106MHz

SOC, EOC, RMC

Compliant

G.inp

Retransmission

Modulation

Discrete Multi Tone (DMT)

SRA

Seamless Rate Adaption

Vectoring

Linear vectoring (CPE)

Duplexing

TDD (Time Division Duplexing)

Bit Swapping

Compliant

NTR

NTR transport on G.fast

Sub carriers

2048 carriers with

12 bits/carrier

RPA

RMC Parameter Adjustment

ToD

Frequency synchronize and Time synchronize

Sub carrier spacing

51.75kHz

FRA

Fast Rate Adaptation

Other Features

ANDR

1Gbps

(Aggregate Net Data Rate)

TIGA

Transmitted Initiated Gain Adjustment

QoS

Flexible packet classify based on Ether Type, VLAN ID or VLAN

FEC

Trellis coding

Priority (supports QinQ)

Reed-Solomon coding

EBM

Ethernet Boot & Management

Maximum TX power

4dBm

Handshake

ITU-T G.994.1

Technical Details:

Hardware

Compact & Robust RJ-45 connector

SGMII/ SERDES connect to host

Access to transceiver function via I2C (SFF-8472) or Ethernet bus for

management & configuration

LED1 : MT5321 G.fast SFP link status LED (YELLOW)

LED2 : SGMII activity LED (GREEN)

Software

Support Ethernet Boot mode and Management (EBM)

Linux SDP driver for managed device

Power Requirement

2 W

Power Supply

3.3 V

Environment

Operating Temperature

0°C ~ +75°C (SFP cage)

Storage Temperature

-20 ~ +85°C

Operating Humidity

10% to 90%

(non-condensed)

Storage Humidity

5% to 95%

(non-condensed)

Surge Protection

4KV

Certification

CE / FCC

Related links to "ALLNET ISP Bridge Modem g.fast 106MHz in Mini-GBIC SFP form"
Available downloads:
Viewed