Products from CableEye / CAMI Research
No results were found for the filter!
CableEye 700 / 1 Jahr erweiterte Garantie
Erneuerung des Produkt-Support-Abonnement 1 Jahr erweiterte Garantie
Part no.:
127775
Herst.Art.Nr.: 700
Herst.Art.Nr.: 700
CableEye 707 / Connector Design Software
Connector Designer Software zum... - Erzeugen von Grafiken anwenderspezifischer Anschlüsse (Position/Anzahl der Pins etc.). - Zeichnen eines Wire-Frame-Image oder Einfügen einer Bild-Datei (.png) des Anschlusses.
Part no.:
127777
Herst.Art.Nr.: 707
Herst.Art.Nr.: 707
CableEye 708 / PinMap Software
PinMap Software - Programm zum Einbinden kundenspezifischer Anschlüsse, Adapter und Platinen in die CableEye Software.
Part no.:
127778
Herst.Art.Nr.: 708
Herst.Art.Nr.: 708
CableEye 709 / Exporter Software
Exporter Software Exportieren von Text oder XML in externe Programme Importieren von Text oder XML aus externen Programmen
Part no.:
127779
Herst.Art.Nr.: 709
Herst.Art.Nr.: 709
CableEye 714 / Fußschalter
Mit diesem robusten Fußschalter für das CableEye System bedienen Sie den "Test"-Schalter bequem mit dem Fuß. Einfach an die "Remote"-Buchse anschließen. Bei Bedarf am Boden Festschraubbar.
Part no.:
127781
Herst.Art.Nr.: 714
Herst.Art.Nr.: 714
CableEye 731 / CB1 interface board (Telco, RJ45, DB15, BNC)
Interface board set CB1 (731): For cables in network and telecom applications (50-pin Centronics, 25-pin Sub-D plug and socket, 2x RJ44/45, 2x Coax-BNC). Set of 2 cards.
Part no.:
127782
Herst.Art.Nr.: 731
Herst.Art.Nr.: 731
CableEye 732/CB2 Interface Board (IDC Socket Connectors)
Interface board set CB2 (732): For ribbon cable 60-, 50-, 40-, 34- and 24-pin set of 2 cards.
Part no.:
127783
Herst.Art.Nr.: 732
Herst.Art.Nr.: 732
CableEye 733 / CB3 interface board (DB37, DB50)
Interface-Platine-Set CB3 (733): Für Digital- und Datakom-Anwendungen (37-pol. Sub-D Buchse und Stecker, 50-pol. Sub-D Buchse und Stecker). Set aus 2 Karten.
Part no.:
127784
Herst.Art.Nr.: 733
Herst.Art.Nr.: 733
CableEye 734 / CB4 interface board (V.35, DB25)
Interface board set CB4 (734): For network and telecom applications (34-pin V.35 socket and plug, 25-pin Sub-D). Set of 2 cards
Part no.:
127785
Herst.Art.Nr.: 734BB
Herst.Art.Nr.: 734BB
CableEye 735 / CB5 interface board (50- and 68-pin SCSI)
Interface board set CB5 (735): 50-pin Centronics (SCSI-I), 50-pin Mini-Centronics (SCSI-I/-II), 50-, 68-pin miniD (SCSI-I/-II/-III). Set of 2 cards.
Part no.:
127786
Herst.Art.Nr.: 735
Herst.Art.Nr.: 735
CableEye 736 / CB6 Interface-Board (HD15, HD26, HD44)
Interface-board-set CB6 (736): Video-, network-, telecom-cables (HD15, HD26, HD44 both male and female). Set of 2 boards.
Part no.:
127787
Herst.Art.Nr.: 736
Herst.Art.Nr.: 736
CableEye 737 / CB7 Interface-Board (HD62, HD78)
Interface-board-set CB7 (737): HD26 and HD78 in both genders. Set of 2 boards.
Part no.:
127788
Herst.Art.Nr.: 737
Herst.Art.Nr.: 737
CableEye 738 / CB8 interface board
Interface board set CB8 (738): For creating your own adapters with up to 62 test points per board with flexible mounting options. Set of 2 cards.
Part no.:
127789
Herst.Art.Nr.: 738
Herst.Art.Nr.: 738
CableEye 739 / CB9 interface board
Interface board set CB9 (739): For Molex and AMP connectors. Set of 2 cards and connectors to dissolve.
Part no.:
127790
Herst.Art.Nr.: 739
Herst.Art.Nr.: 739
CableEye 740 / CB10 interface board (VME, DIN 64-, 96-pin)
Interface-Platine-Set CB10 (740): Interface-Platine mit 96-pol. DIN-Standard VME- und Europadon-Verbinder. Zusätzlicher 40-pol. Flachband-Anschluss für Testpunkte eines Erweiterungs-Moduls. Set aus 2 Karten. 192 Testpunkte erforderlich!
Part no.:
127791
Herst.Art.Nr.: 740
Herst.Art.Nr.: 740
CableEye 741 / CB11 interface board (Elco/Edac 90, 120-pin)
Interface board set CB11 (741): Interface board for Elco 90 and 120 pin rack and panel connectors. Set of 2 cards. Requires 256 test points. Expansion module required when using with M2 (811, 811U) or M3 (821, 821U.)
Part no.:
127792
Herst.Art.Nr.: 741
Herst.Art.Nr.: 741
CableEye 742/CB12 Interface Board (High-Density IDC Socket)
Interface board set CB12 (742): Interface board for HD IDC ribbon cable 0.05 x 0.1" (3x 80-pin Lötraster, without connectors. Suitable for 20-, 26-, 30-, 34-, 40-, 50-, 60-, 68- and 80-pin HD IDC). Set of 2 cards.
Part no.:
127793
Herst.Art.Nr.: 742
Herst.Art.Nr.: 742
CableEye 743 / CB13 Interface board (2 mm headers)
Interface board set CB13 (743): Interface board for 2 mm 6x IDC flat ribbon cable (up to 60 pin). Set of 2 cards and detachable connectors (3x 2-row 72-pin each, replaceable and 1-row 36-pin).
Part no.:
127794
Herst.Art.Nr.: 743
Herst.Art.Nr.: 743
CableEye 744 / CB14 interface board (Molex LFH60, MD26)
Interface board set CB14 (744): Interface board for network cable with 60-pin Molex LFH socket and plug and MD26 socket. Set of 2 cards.
Part no.:
127795
Herst.Art.Nr.: 744
Herst.Art.Nr.: 744
CableEye 745 / CB15 Interface board
(DB9, DB25, HD15, RJ45, RJ12, mDIN) Interface board set CB15 (745): Set of 2 cards.
Part no.:
127796
Herst.Art.Nr.: 745c
Herst.Art.Nr.: 745c
CableEye 747 / CB17 Interface board (CN14,CN24-IEEE488,CN64)
Interface board set CB17 (747): Interface board for AMP Champ (Centronics, Telco, GPIB/IEEE488. 64-pin plug/socket, 24-pin plug/socket, 14-pin plug/socket). Set of 2 cards.
Part no.:
127798
Herst.Art.Nr.: 747
Herst.Art.Nr.: 747
CableEye 748 / CB18 Interface Board (RJ45 Octopus)
Interface board set CB18 (748): Interface board with 8-way RJ45. Set of 2 cards.
Part no.:
127799
Herst.Art.Nr.: 748
Herst.Art.Nr.: 748
CableEye 749 / CB19 Interface Board (Audio Cables)
Interface board set CB19 (749): Interface board for audio cable (XLR 3-pole plug/socket, cinch/phono, jack (mono/stereo), 3.5 mm, MIDI/DIN5, Neutrik Speakon 2-/4-pole, 4 terminals). Set of 2 cards.
Part no.:
127800
Herst.Art.Nr.: 749
Herst.Art.Nr.: 749
CableEye 750 / CB20 interface board
(MC68, MC80, MC100 SCSI III) Interface board set CB20 (750): Interface board for SCSI-III and Ultra-SCSI cables (68-, 80-, 100-pin). Set of 2 cards. Requires 256 test points.
Part no.:
127801
Herst.Art.Nr.: 750
Herst.Art.Nr.: 750
Viewed