Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
39 From 59
No results were found for the filter!
Radxa CM3 Model A Rock3 RK3566 Compute module 2GB RAM /no EMMC no Wifi RM116-D2E0W0 Radxa CM3 Model A Rock3 RK3566 Compute module 2GB RAM /no EMMC no Wifi RM116-D2E0W0
The ROCK3 Compute Module from Radxa (Radxa CM3) is a SoM (System on Module), based on the Rockchip RK3566 SoC in a small form factor of 55mm x 40mm. It integrates CPU/PMU/DRAM/STORAGE and wireless . The CM3 from Radxa offers a...

stock: 0

This product is not available at the moment. Delivery time upon request.

Radxa CM3 Model A Rock3 RK3566 Compute module 1GB RAM /8GB EMMC no Wifi RM116-D1E8W0 Radxa CM3 Model A Rock3 RK3566 Compute module 1GB RAM /8GB EMMC no Wifi RM116-D1E8W0
The ROCK3 Compute Module from Radxa (Radxa CM3) is a SoM (System on Module), based on the Rockchip RK3566 SoC in a small form factor of 55mm x 40mm. It integrates CPU/PMU/DRAM/STORAGE and wireless . The CM3 from Radxa offers a...

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

WS_15837 WS_15837

stock: 0

This product is not available at the moment. Delivery time upon request.

Rock Pi E zbh. Metallgehäuse schwarz Rock Pi E zbh. Metallgehäuse schwarz
Rock Pi E zbh. Metal housing black

stock: 0

This product is not available at the moment. Delivery time upon request.

Rock 3E zbh. PoE Hat / Shield 802.3AT Rock 3E zbh. PoE Hat / Shield 802.3AT
Rock Pi E zbh. PoE Hat / Shield Power your ROCK Pi E with the ROCK PI 802.3at PoE HAT without Passthrough Specs: 802.3af up to 13W(5V/2.6A) Optional 40PIN GPIO pass-through exported Works with ROCK Pi 4, ROCK Pi E, Raspberry Pi 3B+/4,...

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Rock 4 C+ Mipi CSI Kabel für Raspberry Pi CAM Rock 4 C+ Mipi CSI Kabel für Raspberry Pi CAM
Connect your Raspberry Pi CAM to the Rock Pi 4C+ Use your existing Raspberry Pi Cam on new Rock Pi board models Product content: 1 piece ribbon cable adapter (15->15pin) Length: 100mm

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Rock 4 C+ zbh. Heatsink Set Rock 4 C+ zbh. Heatsink Set
Heatsinks und aktive Kühlung für den Rock 4C+

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Rock Pi E - tough. Housing ABS plastic Rock Pi E - tough. Housing ABS plastic
Protect and mount your Rock Pi E with this new functional case. High quality plastic case made of ABS Product Contents: ABS case Screw set (4x) Dimensions: Depth / Dept = 7cm Width = 6,9cm Height / Height = 3.3cm

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

SSD m.2 PCIe  250GB Samsung 980 SSD m.2 PCIe 250GB Samsung 980
Typ: Solid State Module, M.2 2280, M.2/M-Key PCIe 3.0 x4 Geschwindigkeit: (L) 2900MB/s - (S) 1300MB/s Module: 3D-NAND TLC TBW: 150TB Cache: SLC Herstellergarantie: fünf Jahre oder bis Erreichen der TBW

stock: 0

This product is not available at the moment. Delivery time upon request.

SSD m.2 PCIe 1000GB Samsung 980 SSD m.2 PCIe 1000GB Samsung 980
• Typ: Solid State Module, M.2 2280, M.2/M-Key PCIe 3.0 x4 • Geschwindigkeit: (L) 3500MB/s - (S) 3000MB/s • Module: 3D-NAND TLC • TBW: 600TB • Cache: SLC • Herstellergarantie: fünf Jahre oder bis Erreichen der TBW

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

SSD m.2 PCIe 2000GB Samsung 980 PRO (2280) SSD m.2 PCIe 2000GB Samsung 980 PRO (2280)
• Typ: Solid State Module, M.2 2280, M.2/M-Key PCIe 4.0 x4 • Geschwindigkeit: (L) 7000MB/s - (S) 5000MB/s • Module: 3D-NAND TLC • TBW: 1.3PB • Cache: 2GB • Herstellergarantie: fünf Jahre oder bis Erreichen der TBW

stock: 0

This product is not available at the moment. Delivery time upon request.

Radxa E25 Set Dual Ethernet Board 4GB with housing Radxa E25 Set Dual Ethernet Board 4GB with housing
RADXA E25 - a networking Single Board Computer in an ultra-small form factor providing a wide range of networking capabilities. The Radxa E25 o?ers makers, IoT enthusiasts, hobbyists, PC DIY enthusiasts and others a reliable and...

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Radxa Pi zbh. 4K Kamera Radxa Pi zbh. 4K Kamera
The camera has an IMX415 chip and connects Radxa 5B via the CSI interface. The camera provides 8.29M pixels. Sensor: – SONY IMX415 – Diagonal 6.43 mm (Type 1/2.8) – 8.29M pixel – Unit cell size: 1.45 µm (H) × 1.45 µm (V) · Output: – MIPI...

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Rock Pi 4A+ OP1 4GB/32GB (ohne WLAN&Bluetooth) mit PoE Pins Rock Pi 4A+ OP1 4GB/32GB (ohne WLAN&Bluetooth) mit PoE Pins
Rockchip OP1 64bit hexa-core based SBC Small form factor, rich feature set, outstanding design and 11% more performance The Rock Pi 4 A+ is the perfect choice for your personal or business projects. Rock Pi 4A+ product details OP1 64bit...

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

ALLNET 4duino LCD Display I2C ALLNET 4duino LCD Display I2C

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Rock 3A zbh. PoE Hat / Shield 802.3AT Rock 3A zbh. PoE Hat / Shield 802.3AT
Rock 3A zbh. PoE Hat / Shield Power your ROCK 3A with the ROCK PI 802.3at PoE HAT without Passthrough Specs: compliant to the 802.3at standard with 23W PWM controlled fan with up to 12000rpm completely redesigned with performance and...

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Radxa zbh. aktiver Kühlkörper mit Lüfter für Rock 5B Radxa zbh. aktiver Kühlkörper mit Lüfter für Rock 5B
Radxa zbh. Aluminium radiator for Rock 5B Weight: 41g incl. cooling pads SPECIFICATIONS Hole diameter: 3mm Dimensions: 4 x 4 x 1.2 cm Speed: 4300rpm ± 10% Distance between the holes: 5.5 cm Noise: 18dB Material: Aluminium Bearing: Alloy...

stock: 0

This product is not available at the moment. Delivery time upon request.

Rock 4 C+ zbh. Aluminium Gehäuse ecoPI PRO LP, schwarz Rock 4 C+ zbh. Aluminium Gehäuse ecoPI PRO LP, schwarz
Rock 4 C+ zbh. Aluminum case ecoPI PRO LP, black perfect as media player or desktop replacement very easy access to the PCB remove only 4 screws to get full access to your ROCK 4 C+ attractive, clean design very convenient access to SD...

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Snapmaker Hot End für Dual Extrusion Module - 0,4mm Snapmaker Hot End für Dual Extrusion Module - 0,4mm
Extruder Kits für den Dual Extruder des Snapmaker Artisan - 0,4 mm Düse

stock: 0

This product is not available at the moment. Delivery time upon request.

Snapmaker Hot End für Dual Extrusion Module - 0,6mm Snapmaker Hot End für Dual Extrusion Module - 0,6mm
Extruder Kits für den Dual Extruder des Snapmaker Artisan - 0,6 mm Düse

stock: 0

This product is not available at the moment. Delivery time upon request.

Snapmaker Hot End für Dual Extrusion Module - 0,8mm Snapmaker Hot End für Dual Extrusion Module - 0,8mm
Extruder Kits für den Dual Extruder des Snapmaker Artisan - 0,8 mm Düse

stock: 0

This product is not available at the moment. Delivery time upon request.

Snapmaker Rotary Module für Artisan/A350T/A350 EU Version Snapmaker Rotary Module für Artisan/A350T/A350 EU Version
Erweiterungsmodul für den Snapmaker Artisan/A350T/A350 Allgemeine Merkmale: - 4-Achsen-Rotations-Carving und Lasergravur - Rotationscarving mit hoher Präzision - Gebündelte Software- und Hardware-Erfahrung - Snapmaker Luban 4-Achsen...

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Snapmaker Hot End für Dual Extrusion Module - 0,2mm Snapmaker Hot End für Dual Extrusion Module - 0,2mm
Extruder Kits für den Dual Extruder des Snapmaker Artisan - 0,2 mm Düse

stock: 0

This product is not available at the moment. Delivery time upon request.

Snapmaker Hot End für Dual Extrusion Module - 0,4mm gehärtet Snapmaker Hot End für Dual Extrusion Module - 0,4mm gehärtet
Extruder Kits für den Dual Extruder des Snapmaker Artisan - 0,4 mm gehärtete Düse

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

39 From 59
Viewed