Makerspace

Snapmaker 3D-Drucker -Systembaukasten 3-in-1 - Kontrollierte RMA Rückläufer

Part no.: 158318
Herst.Art.Nr.: SNAP_3D_3in1_used

stock: 0

This product is not available at the moment. Delivery time upon request.

Call us Mail us

ANYCUBIC 3D zbh. Mainboard Trigorilla

Part no.: 157533
Herst.Art.Nr.: Anycubic_Mainboard_Trigorilla

stock: 0

This product is not available at the moment. Delivery time upon request.

Call us Mail us

ANYCUBIC Kossel Linear PLUS 3D zbh. Hotend

Part no.: 157243
Herst.Art.Nr.: Anycubic_Kossel_Hotend

stock: 0

This product is not available at the moment. Delivery time upon request.

Call us Mail us

Raspberry Pi Zubehör - Display 10" Touch 1280x800

• Hersteller: Diverse • Plattform: Universal • Diagonale: 10.1" (25.65cm) • Auflösung: 1280x800, 24bit • Panel: Touchscreen, IPS • Schnittstelle: HDMI, USB-A 2.0 • Externe Anschlüsse: N/A • MCU: N/A • Stromversorgung: 5V/2.5A, USB...

Part no.: 151597
Herst.Art.Nr.: Raspi_10"Touch

stock: 0

This product is not available at the moment. Delivery time upon request.

Call us Mail us

Kühlkörper Universal 20mm x 20mm für Banana Pro, FriendlyElec, Lemaker

Kühlkörper Universal für banana pi, Lemaker Guitar, Lemaker HiKey, etc. Besonders für Banana Pro geeignet. Abmessungen: 21mm x 21mm x 6mm (LxBxH) Alu Kühlrippen zur besseren Wärmeableitung

Part no.: 150199
Herst.Art.Nr.: HeatSink_21x21x6

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Kühlkörper Universal 20mm x 28mm für Banana Pi, FriendlyElec, Lemaker

Kühlkörper Universal für banana pi, Lemaker Guitar, Lemaker HiKey, etc. Abmessungen: 20mm x 28mm x 11mm (LxBxH) Alu Kühlrippen zur besseren Wärmeableitung

Part no.: 147722
Herst.Art.Nr.: HeatSink_20x28x11

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Kühlkörper Universal 25mm x 17mm für Banana Pi, FriendlyElec, Lemaker

Kühlkörper Universal für banana pi, Lemaker Guitar, Lemaker HiKey, etc. Abmessungen: 25mm x 17mm x 3mm (LxBxH) Alu Kühlrippen zur besseren Wärmeableitung

Part no.: 147723
Herst.Art.Nr.: HeatSink_25x17x3

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Kühlkörper Universal 25mm x 18mm für Banana Pi, FriendlyElec, Lemaker

Kühlkörper Universal für banana pi, Lemaker Guitar, Lemaker HiKey, etc. Abmessungen: 25mm x 18mm x 5mm (LxBxH) Alu Kühlrippen zur besseren Wärmeableitung

Part no.: 147724
Herst.Art.Nr.: HeatSink_25x18x5

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Kühlkörper Universal 12mm x 12mm für Banana Pi, FriendlyElec, Lemaker

Kühlkörper Universal für banana pi, Lemaker Guitar, Lemaker HiKey, etc. Abmessungen: 12mm x 12mm x 5mm (LxBxH) Alu Kühlrippen zur besseren Wärmeableitung

Part no.: 147725
Herst.Art.Nr.: HeatSink_12x12x5

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Kühlkörper Universal 14mm x 14mm für Banana Pi, FriendlyElec, Lemaker

Kühlkörper Universal für banana pi, Lemaker Guitar, Lemaker HiKey, etc. Abmessungen: 14mm x 14mm x 6mm (LxBxH) Alu Kühlrippen zur besseren Wärmeableitung

Part no.: 147726
Herst.Art.Nr.: HeatSink_14x14x6

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Kühlkörper Universal 8mm x 12mm für Banana Pi, FriendlyElec, Lemaker

Kühlkörper Universal für banana pi, Lemaker Guitar, Lemaker HiKey, etc. Abmessungen: 8mm x 12mm x 5mm (LxBxH) Alu Kühlrippen zur besseren Wärmeableitung

Part no.: 147727
Herst.Art.Nr.: HeatSink_8x12x5

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

ALLNET 4duino Sensor Attitude, Orientierungssensor

"1.Introduction has a 12C interface in single 8-pin packaging compatible with ambient light sensor and proximity sensor with IR LED. Ambient light sensor uses double-light diode to approximate vision response of human eyes at 0.01 lux...

Part no.: 136723
Herst.Art.Nr.: ALL-KS_Attitude

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Synergy 21 Power supply - 12V 105W AC dimmable

Electronic transformer Input: 220-240V, 50/60Hz, 0.29A Output: 11.5V AC (Attention only AC and NO DC), 0-105W Dimmable: phase cut-on/phase cut-off Size: 114mm x 44mm x 29mm

Part no.: 159523
Herst.Art.Nr.: S21-PS-12105

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Red Pitaya Diagnose-Kit / Diagnose-Kit mit Red Pitaya Board V1.1, 2 x 100 MHz Tastkopf,...

Diagnose-Kit mit Red Pitaya Board V1.1, 2 x 100 MHz Oszilloskop-Tastkopf, 2 x Adapter SMA (Außengewinde) auf BNC (Innengewinde), Micro-USB-Netzteiladapter und 4 GB microSD-Karte

Part no.: 151609
Herst.Art.Nr.: STEMlab 125-14 Starter Kit PL

stock: 0

This product is not available at the moment. Delivery time upon request.

Call us Mail us

Rock Pi Adapter MicroSD - MicroSD Verlängerung Kabel

Rock Pi adapter SD card - MicroSD extension cable This extension cable can be used to extend a micro SD slot. Thanks to the flexibility of the cable it is possible to route the slot into a housing, for example. The cables are...

Part no.: 162798
Herst.Art.Nr.: RockmSD-to-mSDAdapter

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Rock Pi Adapter SD Karte - MicroSD Verlängerung Kabel

Rock Pi adapter SD card - MicroSD extension cable This extension cable can be used to extend a micro SD slot. Thanks to the flexibility of the cable, it is possible to move the slot into a housing, for example. The cables are...

Part no.: 162899
Herst.Art.Nr.: Rock-SD-mSDAdapt-15CM

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

ALLNET 4duino 3D Drucker zbh. Schneckengebläse Lüfter Fan FD5015B2M-BP00

Schneckengebläse für 3D Drucker wie Anycubic i3 Mega und Andere. Größe: 5,2x5,2x1,5cm, Kabellänge 20cm Voltage: 12V Power: 0,06A 0,72W Model : FD5015B2M-BP00 Size : 1.96"*1.96"*0.59"/50mmx50mmx15mm Frame Material:Thermoplastic PBT to...

Part no.: 163557
Herst.Art.Nr.: FD5015B2M-BP00

stock: 0

This product is not available at the moment. Delivery time upon request.

Call us Mail us

Raspberry Pi 4 Zubehör - Gehäuse Hutschiene / DIN Rail mit Fenster grau für Pi 4B

Das Italtronic-Modulbox-Gehäuse für DIN-Schienenmontage (EN 60715) ist für den Schutz der Entwicklungsplatinen Raspberry Pi 4 Modelle vorgesehen. Dieses Raspberry Pi-Gehäuse für DIN-Schienenmontage entspricht DIN 43880 und genügt damit...

Part no.: 162931
Herst.Art.Nr.: 25.0410000.RP4

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

ALLNET 4duino 3D Nozzles M6 Düse verschiedene Größen für Snapmaker, Anycubic etc...

ALLNET 3D Nozzles M6 Düse verschiedene Größen für Snapmaker, Anycubic etc... 0.3,0.4,0.6,0.8, 1.0 mm

Part no.: 160014
Herst.Art.Nr.: ALL_3D_nozzle_kit

stock: 0

This product is not available at the moment. Delivery time upon request.

Call us Mail us

Sale

3Dsimo Schaumstoff-Schneider Erweiterung / Foam cutting austauschbar für 3Dsimo MultiPro

3Dsimo Schaumstoff-Schneider Erweiterung Foam cutting austauschbar für 3Dsimo MultiPro

Part no.: 159843
Herst.Art.Nr.: 3dsimo-tips-foam-multi

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Sale

3Dsimo Löt-Spitzen austauschbar für 3Dsimo MultiPro

Part no.: 159842
Herst.Art.Nr.: 3dsimo-tips-soldering-multi

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Rock Pi 4 zbh. Heatsink Cooler Heat sink

Rock Pi 4 zbh. Heatsink cooler not suitable for Rock Pi 4C Dimensions 85x55x15 incl. spacer

Part no.: 159571
Herst.Art.Nr.: RockHeatsink

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

ALLNET SMD Lötbausatz "Licht Lineal" / "Light Ruler"

Inhalt des SMD Lötbausatzes • 2x Kondensator 22μF in 1206 • 1x LED gelb in 1206 • 3x LED blau in 0805 • 1x LED grün in 0603 • 1x LED rot in 0402 • 1x LED RGB • 2x Transistor npn • 3x Potentiometer 5kΩ • 1x Widerstand 270Ω in 1206 • 1x...

Part no.: 157137
Herst.Art.Nr.: ALL-LBS-LL

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays

Rock Pi 4 zbh. USB 3.0 Male Type A to A 1,5m

Rock Pi 4 zbh. USB 3.0 Male Type A to A for USB Firmaware upgrading, USB gadgets and Android ADB debug

Part no.: 158949
Herst.Art.Nr.: RockUSB3.0TypeA-A

stock: 0

Ready to ship today,
Delivery time appr. 1-3 workdays