Top seller
No results were found for the filter!
Siglent SCD600mA SHS800X, SHS1000X current measurement accessory, 600 mA range
SHS800X, SHS1000X current measurement accessory, 600 mA range
Part no.:
227774
Herst.Art.Nr.: SCD600mA
Herst.Art.Nr.: SCD600mA
Siglent SCD10A SHS800X, SHS1000X current measurement accessory, 10 A range
SHS800X, SHS1000X current measurement accessory, 10 A range
Part no.:
227775
Herst.Art.Nr.: SCD10A
Herst.Art.Nr.: SCD10A
Siglent SCD30A Digital multimeter 30A
Digital multimeter 30A current shunt-1mV/A, DC ~ 1 kHz ±0.3%, 1 kHz ~ 5 kHz ±5%, 30Vac RMS MAX, 60Vdc MAX (only compatible with SDM series multimters which are 4 1/2 or above)
Part no.:
227776
Herst.Art.Nr.: SCD30A
Herst.Art.Nr.: SCD30A
Siglent SC1016 ONLY for SDM3055-SC and SDM3065X-SC; THIS IS NO UPGRADE KIT.
ONLY for SDM3055-SC and SDM3065X-SC; THIS IS NO UPGRADE KIT.
A multiplexer that provides multi-point measurement capabilities to the SDM3000-SC series of digital multimeters. The scanner features 12 multi-purpose + 4 current channels and...
Part no.:
227777
Herst.Art.Nr.: SC1016
Herst.Art.Nr.: SC1016
Siglent SDS7304A H12 3GHz; 12-bit; 4 channels; 20 GSa/s; 500Mpts memory depth
3GHz; 12-bit; 4 channels; 20 GSa/s; 500Mpts memory depth; 1,000,000 wfm/s waveform capture rate; 32 Mpts FFT; Eye/Jitter Analysis(opt.); Compliance Test(opt.); 15.6’’ touch screen
Part no.:
227778
Herst.Art.Nr.: SDS7304A H12
Herst.Art.Nr.: SDS7304A H12
Siglent SDS7404A H12 4GHz; 12-bit; 4 channels; 20 GSa/s; 500Mpts memory depth
4GHz; 12-bit; 4 channels; 20 GSa/s; 500Mpts memory depth; 1,000,000 wfm/s waveform capture rate; 32 Mpts FFT; Eye/Jitter Analysis(opt.); Compliance Test(opt.); 15.6’’ touch screen
Part no.:
227779
Herst.Art.Nr.: SDS7404A H12
Herst.Art.Nr.: SDS7404A H12
Siglent SAP2500D Differential Active Probe, 2.5 GHz
Differential Active Probe, 2.5 GHz
Part no.:
227760
Herst.Art.Nr.: SAP2500D
Herst.Art.Nr.: SAP2500D
Siglent SCP5030 Bandwidth: 50MHz; Maximum continuous current 30Arms; Peak current...
Bandwidth: 50MHz; Maximum continuous current 30Arms; Peak current 50A;Switching ratio:5A/30A; Accuracy:5A(±1%±1mA);30A(±1%±10mA); Powered by oscilloscope through SAPBUS interface
Part no.:
227761
Herst.Art.Nr.: SCP5030
Herst.Art.Nr.: SCP5030
Siglent SCP5030A Bandwidth: 100 MHz; Maximum continuous current 30 Arms; Peak current...
Bandwidth: 100 MHz; Maximum continuous current 30 Arms; Peak current 50 A; Switching ratio: 5 A/30; Accuracy: 5 A(±1%±1 mA); 30 A(±1%±10 mA); Powered by oscilloscope through SAPBUS interface
Part no.:
227762
Herst.Art.Nr.: SCP5030A
Herst.Art.Nr.: SCP5030A
Siglent SCP5150 Bandwidth: 12 MHz; Maximum continuous current 150 Arms; Peak current...
Bandwidth: 12 MHz; Maximum continuous current 150 Arms; Peak current 300 A; Switching ratio: 30 A/150 A; Accuracy: 30 A(±1%±10 mA); 150 A(±1%±100 mA); Powered by oscilloscope through SAPBUS interface
Part no.:
227763
Herst.Art.Nr.: SCP5150
Herst.Art.Nr.: SCP5150
Siglent SCP5500 Bandwidth: 2 MHz; Maximum continuous current 500 Arms; Peak current 750...
Bandwidth: 2 MHz; Maximum continuous current 500 Arms; Peak current 750 A; Switching ratio: 75 A/500 A; Accuracy: 75 A(±1%±10 mA); 500 A(±1%±100 mA); Powered by oscilloscope through SAPBUS interface
Part no.:
227764
Herst.Art.Nr.: SCP5500
Herst.Art.Nr.: SCP5500
Siglent SDG-BNC For SDG2000X(Standard)
For SDG2000X(Standard)
Part no.:
227765
Herst.Art.Nr.: SDG-BNC
Herst.Art.Nr.: SDG-BNC
Siglent SPD-Cable-1 Alligator clip to banana plug, length 600 mm, black and red as a pair
Alligator clip to banana plug, length 600 mm, black and red as a pair
Part no.:
227766
Herst.Art.Nr.: SPD-Cable-1
Herst.Art.Nr.: SPD-Cable-1
Siglent SPD-Cable-2 Alligator clip to U type, length 600 mm, black and red as a pair
Alligator clip to U type, length 600 mm, black and red as a pair
Part no.:
227767
Herst.Art.Nr.: SPD-Cable-2
Herst.Art.Nr.: SPD-Cable-2
Siglent SPS5000X-SEC SPS5000X Series cable
SPS5000X Series cable
Part no.:
227768
Herst.Art.Nr.: SPS5000X-SEC
Herst.Art.Nr.: SPS5000X-SEC
Siglent SPS5000X-PAC SPS5000X Parallel cable
SPS5000X Parallel cable
Part no.:
227769
Herst.Art.Nr.: SPS5000X-PAC
Herst.Art.Nr.: SPS5000X-PAC
Siglent SPL-C1 Logic probe clips for SPL2016
Logic probe clips for SPL2016
Part no.:
227770
Herst.Art.Nr.: SPL-C1
Herst.Art.Nr.: SPL-C1
Siglent LPA10 Active Probe Adapter, work with Lecroy ZD1000 and AP033,compatible with...
Active Probe Adapter, work with Lecroy ZD1000 and AP033,compatible with SDS5000X Series
Part no.:
227747
Herst.Art.Nr.: LPA10
Herst.Art.Nr.: LPA10
Siglent TPA10 SDS5000X Series Active Probe Adapter
SDS5000X Series Active Probe Adapter, Bandwidth 4GHz, support Tektronix TekProbe interface level II.
Part no.:
227748
Herst.Art.Nr.: TPA10
Herst.Art.Nr.: TPA10
Siglent PAK1 Probe Accessories Kit for PB470, PP510, PP215, PP430, SP2030A, SP2035A,...
Probe Accessories Kit for PB470, PP510, PP215, PP430, SP2030A, SP2035A, SP2035
Part no.:
227749
Herst.Art.Nr.: PAK1
Herst.Art.Nr.: PAK1
Siglent PAK2 Probe Accessories Kit for SP3050A
Probe Accessories Kit for SP3050A
Part no.:
227750
Herst.Art.Nr.: PAK2
Herst.Art.Nr.: PAK2
Siglent SAP-ST1 5 pcs in a box, Straight Tip, for SAP1000, SAP2500,
5 pcs in a box, Straight Tip, for SAP1000, SAP2500, SAP2500D;The straight tip is rugged and designed for general probing. Fits in either probe socket.
Part no.:
227751
Herst.Art.Nr.: SAP-ST1
Herst.Art.Nr.: SAP-ST1
Siglent SAP-PT 5 pcs in a box, Pogo Tip,for SAP1000, SAP2500, SAP2500D
5 pcs in a box, Pogo Tip,for SAP1000, SAP2500, SAP2500D;The pogo tip provides z axis compliance. The tip can fit into a socket or via and onto an IC leg.
Part no.:
227752
Herst.Art.Nr.: SAP-PT
Herst.Art.Nr.: SAP-PT
Siglent SAP1-kit Probe kits for SAP1000,SAP2500
Probe kits for SAP1000,SAP2500;including Straight Tip *5, Pogo Tip *5,L In Adapter *1,Z Ground *1,Y Lead Adapter *1,Right Angle Pin Lead 5 cm *1,Straight Pin Lead 6 cm *1,Right Angle Pin Lead 10 cm * 1,Straight Pin Lead12 cm *1, Channel...
Part no.:
227753
Herst.Art.Nr.: SAP1-kit
Herst.Art.Nr.: SAP1-kit
Viewed