Top seller
No results were found for the filter!

Rackmount kit , compatible with the SPD3000X/X-E/D/S/C models
Part no.:
227743
Herst.Art.Nr.: SPD3000-RMK
Herst.Art.Nr.: SPD3000-RMK

SPS5000X EIA Standard rack, height 3U
Part no.:
227744
Herst.Art.Nr.: SPS5000X-RMK
Herst.Art.Nr.: SPS5000X-RMK

Rack mount kit; SSG6000A; Height
Part no.:
227745
Herst.Art.Nr.: SSG6000A-RMK
Herst.Art.Nr.: SSG6000A-RMK

one pair of multimeter pen test leads (1000V), (Accessory for SDM3000 )
Part no.:
227746
Herst.Art.Nr.: SDM-PB
Herst.Art.Nr.: SDM-PB

Active Probe Adapter, work with Lecroy ZD1000 and AP033,compatible with SDS5000X Series
Part no.:
227747
Herst.Art.Nr.: LPA10
Herst.Art.Nr.: LPA10

SDS5000X Series Active Probe Adapter, Bandwidth 4GHz, support Tektronix TekProbe interface level II.
Part no.:
227748
Herst.Art.Nr.: TPA10
Herst.Art.Nr.: TPA10

Probe Accessories Kit for PB470, PP510, PP215, PP430, SP2030A, SP2035A, SP2035
Part no.:
227749
Herst.Art.Nr.: PAK1
Herst.Art.Nr.: PAK1

Probe Accessories Kit for SP3050A
Part no.:
227750
Herst.Art.Nr.: PAK2
Herst.Art.Nr.: PAK2

5 pcs in a box, Straight Tip, for SAP1000, SAP2500, SAP2500D;The straight tip is rugged and designed for general probing. Fits in either probe socket.
Part no.:
227751
Herst.Art.Nr.: SAP-ST1
Herst.Art.Nr.: SAP-ST1

5 pcs in a box, Pogo Tip,for SAP1000, SAP2500, SAP2500D;The pogo tip provides z axis compliance. The tip can fit into a socket or via and onto an IC leg.
Part no.:
227752
Herst.Art.Nr.: SAP-PT
Herst.Art.Nr.: SAP-PT

Probe kits for SAP1000,SAP2500;including Straight Tip *5, Pogo Tip *5,L In Adapter *1,Z Ground *1,Y Lead Adapter *1,Right Angle Pin Lead 5 cm *1,Straight Pin Lead 6 cm *1,Right Angle Pin Lead 10 cm * 1,Straight Pin Lead12 cm *1, Channel...
Part no.:
227753
Herst.Art.Nr.: SAP1-kit
Herst.Art.Nr.: SAP1-kit

Probe kits for SAP2500D, including Straight Tip *5, Pogo Tip *5,Swivel Tip *2,Tip Saver *2,Y Lead Adapter *2,Right Angle Pin Lead 5
cm * 1,Straight Pin Lead 6 cm * 1,Straight Pin Lead
12 cm * 1,Spring loaded Ground (Short) * 2,Spring...
Part no.:
227754
Herst.Art.Nr.: SAP2-kit
Herst.Art.Nr.: SAP2-kit

10X attenuation,11 pf,10 Mohm,
500 MHz,CAT ? 400 Vrms,operating temperature 0 to 50 degrees
Part no.:
227757
Herst.Art.Nr.: SP3050A
Herst.Art.Nr.: SP3050A

10X attenuation,11 pf,10 Mohm,
500 MHz,CAT ? 400 Vrms,operating temperature 0 to 50 degrees (SDS6000A only)
Part no.:
227758
Herst.Art.Nr.: SP3150A
Herst.Art.Nr.: SP3150A

Differential Active Probe, 2.5 GHz
Part no.:
227760
Herst.Art.Nr.: SAP2500D
Herst.Art.Nr.: SAP2500D

Bandwidth: 50MHz; Maximum continuous current 30Arms; Peak current 50A;Switching ratio:5A/30A; Accuracy:5A(±1%±1mA);30A(±1%±10mA); Powered by oscilloscope through SAPBUS interface
Part no.:
227761
Herst.Art.Nr.: SCP5030
Herst.Art.Nr.: SCP5030

Bandwidth: 100 MHz; Maximum continuous current 30 Arms; Peak current 50 A; Switching ratio: 5 A/30; Accuracy: 5 A(±1%±1 mA); 30 A(±1%±10 mA); Powered by oscilloscope through SAPBUS interface
Part no.:
227762
Herst.Art.Nr.: SCP5030A
Herst.Art.Nr.: SCP5030A

Bandwidth: 12 MHz; Maximum continuous current 150 Arms; Peak current 300 A; Switching ratio: 30 A/150 A; Accuracy: 30 A(±1%±10 mA); 150 A(±1%±100 mA); Powered by oscilloscope through SAPBUS interface
Part no.:
227763
Herst.Art.Nr.: SCP5150
Herst.Art.Nr.: SCP5150

Bandwidth: 2 MHz; Maximum continuous current 500 Arms; Peak current 750 A; Switching ratio: 75 A/500 A; Accuracy: 75 A(±1%±10 mA); 500 A(±1%±100 mA); Powered by oscilloscope through SAPBUS interface
Part no.:
227764
Herst.Art.Nr.: SCP5500
Herst.Art.Nr.: SCP5500

For SDG2000X(Standard)
Part no.:
227765
Herst.Art.Nr.: SDG-BNC
Herst.Art.Nr.: SDG-BNC

Alligator clip to banana plug, length 600 mm, black and red as a pair
Part no.:
227766
Herst.Art.Nr.: SPD-Cable-1
Herst.Art.Nr.: SPD-Cable-1

Alligator clip to U type, length 600 mm, black and red as a pair
Part no.:
227767
Herst.Art.Nr.: SPD-Cable-2
Herst.Art.Nr.: SPD-Cable-2

SPS5000X Series cable
Part no.:
227768
Herst.Art.Nr.: SPS5000X-SEC
Herst.Art.Nr.: SPS5000X-SEC
Viewed