Top seller
No results were found for the filter!
ALLNET ALL3696 / Powermeter ALL3696 IP with 2x induction
Know what´s happening Reacheable via Wifi Analysing power consumption and supply Measurement value logging with sensors Controlling and shifting Save elictricity The ALLNET ALL3696 is the evolution result of the successful ALL369x...
Part no.:
118725
Herst.Art.Nr.: ALL3696
Herst.Art.Nr.: ALL3696
stock:
0
Ready to ship today,
Delivery time appr. 1-3 workdays
ALLNET ALL3697-32A / PM4 DIN-Rail Powermeter 32A 3 phase
Know what's going on! Find power guzzlers! Analyzing power consumption! Save electricity! Highlight: Meter to measure and control your current power consumption Direct connection of the current phases up to 32A per phase. Current...
Part no.:
109096
Herst.Art.Nr.: ALL3697-32A
Herst.Art.Nr.: ALL3697-32A
stock:
0
Ready to ship today,
Delivery time appr. 1-3 workdays
ALLNET ALL369x-A800/ Powermeter Induction clamp set 800 A
Set of 3 induction terminals for the ALLNET ALL3690/3691 Power Meter For currents up to 800 amps per phase for all three phases Inner diameter of clamp = 30mm Current terminals NEVER connect without load ( ALL369x )
Part no.:
88373
Herst.Art.Nr.: ALL369x-A800
Herst.Art.Nr.: ALL369x-A800
stock:
0
Ready to ship today,
Delivery time appr. 1-3 workdays
ALLNET ALL369x-D0-01 / Optical D-0 read head for ALL3691
D0 sensor for ALL3691 for removing the D0 signal to modern electricity meters. The D0 signal is usually every 2 seconds automatically sent from the electricity meter of the energy supplier in the infrared range. Since each type of...
Part no.:
92145
Herst.Art.Nr.: ALL3689
Herst.Art.Nr.: ALL3689
stock:
0
Ready to ship today,
Delivery time appr. 1-3 workdays
ALLNET ALL369x-A050 / Powermeter Induction clamp set 50 A
Set of 3 induction terminals for the ALLNET ALL3690/3691 Power Meter for currents up to 50 amps per phase for all three phases Inner diameter of clamp: 10mm Current terminals NEVER connect without load ( ALL369x )
Part no.:
88380
Herst.Art.Nr.: ALL369x-A050
Herst.Art.Nr.: ALL369x-A050
stock:
0
Ready to ship today,
Delivery time appr. 1-3 workdays
ALLNET ALL3692 / Smart-Meter-Gateway PM3 4x D0 Connectors
Power Source and Consumption monitoring accessible via LAN/WLAN Analyse Power Consumption and feed Sensors capture measured values ??over controlling and switching save electricity! The Allnet ALL3692 is the consistent further...
Part no.:
101241
Herst.Art.Nr.: ALL3692
Herst.Art.Nr.: ALL3692
![ALLNET ALL3688 / Powermeter att. PM2 optical D0-read head "E](https://shop.allnet.dk/media/image/09/26/32/I354188d483489dc7e952_200x200.jpg "ALLNET ALL3688 / Powermeter att. PM2 optical D0-read head "E")
ALLNET ALL3688 / Powermeter att. PM2 optical D0-read head "E
D0 sensor for ALL3691/3692/3696 to pick up the D0 signal on modern electricity meters. The D0 signal is usually sent automatically every 2 seconds from the utility's electricity meter in the infrared range. The OKK D0 reading head is...
Part no.:
101240
Herst.Art.Nr.: ALL3688
Herst.Art.Nr.: ALL3688
stock:
0
Ready to ship today,
Delivery time appr. 1-3 workdays
ALLNET ALL369x-A200 / Powermeter Induction clamp set 200 A
Set of 3 induction terminals for the ALLNET ALL3690/ALL3691 Power Meter for currents up to 200 amps per phase for all three phases, Inner diameter of clamp = 20mm Connection cable with plug 180cm length Current terminals NEVER connect...
Part no.:
84807
Herst.Art.Nr.: ALL369x-A200
Herst.Art.Nr.: ALL369x-A200
stock:
0
Ready to ship today,
Delivery time appr. 1-3 workdays
Viewed