Top seller
No results were found for the filter!
Ersatzteil-Kit für M3U Kabeltester
Part no.:
128243
Herst.Art.Nr.: 723
Herst.Art.Nr.: 723
Adapter vertical for Connector-Board-Set CB48 ÜTransition-Protection-Adapter.
Part no.:
127869
Herst.Art.Nr.: 778A
Herst.Art.Nr.: 778A
Adapter right-angled for Connector Board Set CB48 ÜTransition Protection Adapter.
Part no.:
127870
Herst.Art.Nr.: 778B
Herst.Art.Nr.: 778B
(64-pin Light Director Board)
Part no.:
127867
Herst.Art.Nr.: 767A
Herst.Art.Nr.: 767A
(128-poliges Light Director Board) Interface board set CB38 (768): Light Director system module for LED-guided cable mounting. From 65 up to 128 connections. Single module.
Part no.:
127868
Herst.Art.Nr.: 768A
Herst.Art.Nr.: 768A
Interface board set CB29H (HV Rated)
Part no.:
127862
Herst.Art.Nr.: 759H
Herst.Art.Nr.: 759H
Interface board set CB30A (760A): For Mictor connectors (38-, 76- or 114-pin). Set of 2 cards for mounting on CB30. Without connector. Requires 256 test points.
Part no.:
127863
Herst.Art.Nr.: 760A
Herst.Art.Nr.: 760A
(Cannon DL-60, -96, -156 ZIF) Interface board set CB30B (760B): For Cannon DL connectors (60, 96 or 156 pin). Set of 2 cards for mounting on CB30. Without connector. Requires 256 test points.
Part no.:
127864
Herst.Art.Nr.: 760B
Herst.Art.Nr.: 760B
Interface board CB30C (Molex LFH160)
Part no.:
127865
Herst.Art.Nr.: 760C
Herst.Art.Nr.: 760C
Interface board CB30D (Molex LFH200)
Part no.:
127866
Herst.Art.Nr.: 760D
Herst.Art.Nr.: 760D
Interface board set CB29A (759A): Interface board with 64 screw terminals (4 rows of 16 terminals each) with 5 mm spacing. Transition system for wiring harness mounting cards. Set of 2 cards. Stackable (see illustration).
Part no.:
127858
Herst.Art.Nr.: 759A
Herst.Art.Nr.: 759A
Interface board set CB29AH (HV Rated)
Part no.:
127860
Herst.Art.Nr.: 759AH
Herst.Art.Nr.: 759AH
Interface board for cables with open ends. Identical to CB29 but without connection blanking. For use with own connection sleeves as adapter cable interface or other use. Single card.
Part no.:
127861
Herst.Art.Nr.: 759BB
Herst.Art.Nr.: 759BB
Interface board set CB26N (756N): Interface board for CB26. USB 3.0 A, B, Combo-AB. Set of 2 cards.
Part no.:
127857
Herst.Art.Nr.: 756N
Herst.Art.Nr.: 756N
Interface board set CB26H (756H): Interface board for CB26. For iPass (36-pin external/26-pin internal). Set of 2 cards (without connector).
Part no.:
127852
Herst.Art.Nr.: 756H
Herst.Art.Nr.: 756H
Interface board set CB26I (756I): Interface board for CB26. 4-fold Serial ATA. Set of 2 cards.
Part no.:
127853
Herst.Art.Nr.: 756I
Herst.Art.Nr.: 756I
Interface board set CB26K (756K): Interface board for CB26. For display port connectors. Set of 2 cards (without connector).
Part no.:
127854
Herst.Art.Nr.: 756K
Herst.Art.Nr.: 756K
Interface board set CB26L (756L): Interface board for CB26. 9-, 15- and 25-pin MicroD sockets. Set of 2 cards.
Part no.:
127855
Herst.Art.Nr.: 756L
Herst.Art.Nr.: 756L
Interface board set CB26F (756F): Interface board for CB26. For InfiniBand connectors (25-pin). Set of 2 cards.
Part no.:
127850
Herst.Art.Nr.: 756F
Herst.Art.Nr.: 756F
Interface board set CB26A (756A): Interface board for CB26. 2x 26-pin Smart Serial connectors (Cisco type). Set of 2 cards.
Part no.:
127845
Herst.Art.Nr.: 756A
Herst.Art.Nr.: 756A
Interface board set CB26B (756B): Interface board for CB26. 50- and 68-pin 0.8 mm VHDCI connectors. Set of 2 cards. M2 or M3 required, does not work with the M2 base system.
Part no.:
127846
Herst.Art.Nr.: 756B
Herst.Art.Nr.: 756B
Interface board set CB26C (756C): Interface board for CB26. For RJ11 and RJ12 cables, RJ45/RJ48. Set of 2 cards.
Part no.:
127847
Herst.Art.Nr.: 756C
Herst.Art.Nr.: 756C
Interface board set CB26D (756D): Interface board for CB26. For IEEE1394b, USB miniB, Serial ATA. Set of 2 cards.
Part no.:
127848
Herst.Art.Nr.: 756D
Herst.Art.Nr.: 756D
Interface-Platine-Set CB26E (756E): Interface-Platine für CB26. Für HDMI-Kabel (High Definition Multimedia Interface). Set aus 2 Karten.
Part no.:
127849
Herst.Art.Nr.: 756E
Herst.Art.Nr.: 756E
Viewed