Top seller
No results were found for the filter!
Interface board set CB21 (751): Interface board for SCSI-III and Ultra-SCSI cables (68-, 80-, 100-pin). Set of 2 cards. Requires 256 test points.
Part no.:
127802
Herst.Art.Nr.: 751
Herst.Art.Nr.: 751
Interface-Platine-Set CB23 (753): Interface-Platine für Mini-Centronics/Champ FH (SCSI-II und III, 20-, 26-, 36-, 50-, 68-pol.). Set aus 2 Karten. Erfordert 152 Test-Punkte. Kompatibel zu den Modellen M2 (811, 811U) und M3 (821, 821U).
Part no.:
127804
Herst.Art.Nr.: 753
Herst.Art.Nr.: 753
Interface board set CB24 (754): Interface board for IDC flat ribbon cable (68-, 80-, 100-pin). Set of 2 cards. Requires 256 test points. Expansion module required for M2 (811) or M3 (821) models.
Part no.:
127805
Herst.Art.Nr.: 754
Herst.Art.Nr.: 754
Interface board for long cables (over 3 m) and transient suppression for high static environments (64 transient Lüsch diodes). Set of 2 cards.
Part no.:
127806
Herst.Art.Nr.: 755
Herst.Art.Nr.: 755
(Bare Wire Transition Board) Interface board set CB17 (747): Interface board for cables with open ends (16 4-way terminals). Single card.
Part no.:
127808
Herst.Art.Nr.: 757
Herst.Art.Nr.: 757
Interface board set CB28 (758): Interface board for Molex Mate-N-Lok connectors. Unsupported board for various connector types. Set of 2 cards.
Part no.:
127809
Herst.Art.Nr.: 758
Herst.Art.Nr.: 758
Interface board set CB29 (759): Interface board with 64 screw terminals (4 rows of 16 terminals each) with 5 mm spacing. Set of 2 cards.
Part no.:
127810
Herst.Art.Nr.: 759
Herst.Art.Nr.: 759
(customer-specific interfaces up to 128 TP)
Part no.:
127811
Herst.Art.Nr.: 760
Herst.Art.Nr.: 760
Interface board set CB31 (761): Interface board for Metral/FCI connectors. Unsupported board for various connector types. Set of 2 cards. 256 test points required.
Part no.:
127812
Herst.Art.Nr.: 761
Herst.Art.Nr.: 761
Interface board set CB32 (762): Interface board for DB104 High Density connectors. Unplugged card for plug/socket. Set of 2 cards.
Part no.:
127813
Herst.Art.Nr.: 762
Herst.Art.Nr.: 762
Interface board set CB33 (763): Interface board for Molex MiniFit, MiniFit Sr. and MicroFit connectors. Unsupported card for various connector types. Set of 2 cards.
Part no.:
127814
Herst.Art.Nr.: 763
Herst.Art.Nr.: 763
Interface board set CB34 (764): Interface board for Cirris adapter cards. For one 64-point or two 32-point Cirris adapter cards.
Part no.:
127815
Herst.Art.Nr.: 764
Herst.Art.Nr.: 764
Interface board CB35 (765): Interface board with 10 SPDT relays (single-pole changeover contacts). 1 card. Relay Specifications: Contact load 0.5 A at 125 VAC, 1 A at 24 VDC. Contact resistance: max. 100 mOhm. Bounce time: 0.2 ms...
Part no.:
127816
Herst.Art.Nr.: 765
Herst.Art.Nr.: 765
Interface board set CB40 (770): Interface board for Elco/Edac 20, 38 and 56 pin rack and panel connectors. Set of 2 cards (without connector).
Part no.:
127818
Herst.Art.Nr.: 770
Herst.Art.Nr.: 770
(Micro D M-F 21/25/31/37-pin) Interface board set CB41 (771): Interface board for MicroD 21-, 25-, 31- and 37-pin connectors (plug/socket). Set of 2 cards (without connector).
Part no.:
127819
Herst.Art.Nr.: 771
Herst.Art.Nr.: 771
Interface board set CB42 (772): Interface board for MicroD 9-, 15- and 51-pin connectors (plug/socket). Set of 2 cards (without connector).
Part no.:
127820
Herst.Art.Nr.: 772
Herst.Art.Nr.: 772
(Micro D 9/15/21/25/31/37-pin) Interface board set CB43 (773): Interface board for MicroD 9-, 15-, 21-, 25-, 31- and 37-pin connectors (either plugs or sockets). Set of 2 cards (without connectors).
Part no.:
127821
Herst.Art.Nr.: 773
Herst.Art.Nr.: 773
Interface board set CB44 (774): Interface board for MicroD 51 and 100 pin connectors (either plugs or sockets). Set of 2 cards (without connectors). 256 test points required.
Part no.:
127822
Herst.Art.Nr.: 774
Herst.Art.Nr.: 774
(1mm and 5mm SMT Connectors)
Interface board set CB45 (775): For 1 mm and 0.5 mm SMD connectors. Unassembled. Set of 2 cards.
Part no.:
127823
Herst.Art.Nr.: 775
Herst.Art.Nr.: 775
(Micro D 100-pin, Airborn Footprint) Interface board set CB46 (776): For 100-pin MicroD connector, Airborn-Style Footprint. Unsatisfactory. Set of 2 cards.
Part no.:
127824
Herst.Art.Nr.: 776
Herst.Art.Nr.: 776
Interface board set CB47 (777): For DB62HD connectors, certified for operation up to 1000 VDC. Unsatisfied. Set of 2 cards.
Part no.:
127825
Herst.Art.Nr.: 777
Herst.Art.Nr.: 777
Erweitert CableEye HVX um weitere 128 Testpunkte Mit dem CableEye HVX Hochspannungs-Test-System prüfen Sie bequem beliebige Kabel, zum Beispiel auf Durchgang, offene Leitungen, Kurzschlüsse oder fehlerhafte Verdrahtung. Vom PC aus...
Part no.:
127830
Herst.Art.Nr.: 828
Herst.Art.Nr.: 828
Das HVX ist der Hochspannungstester der CableEye Serie. Im Niederspannungsbereich bis 10V bietet er die selbe Funktionalität, wie das M3U. Darüber hinaus ist es möglich, den Isolationswiderstand des jeweiligen Prüflings mit einer...
Part no.:
127831
Herst.Art.Nr.: 829
Herst.Art.Nr.: 829
Erweiterungs-Modul für HVX: 4-Draht Widerstandsmessung.
Part no.:
127832
Herst.Art.Nr.: 832
Herst.Art.Nr.: 832
Viewed