Top seller
No results were found for the filter!
Siglent SPD-Cable-1 Alligator clip to banana plug, length 600 mm, black and red as a pair
Alligator clip to banana plug, length 600 mm, black and red as a pair
Part no.:
227766
Herst.Art.Nr.: SPD-Cable-1
Herst.Art.Nr.: SPD-Cable-1
Siglent SPD-Cable-2 Alligator clip to U type, length 600 mm, black and red as a pair
Alligator clip to U type, length 600 mm, black and red as a pair
Part no.:
227767
Herst.Art.Nr.: SPD-Cable-2
Herst.Art.Nr.: SPD-Cable-2
Siglent SPS5000X-SEC SPS5000X Series cable
SPS5000X Series cable
Part no.:
227768
Herst.Art.Nr.: SPS5000X-SEC
Herst.Art.Nr.: SPS5000X-SEC
Siglent SPS5000X-PAC SPS5000X Parallel cable
SPS5000X Parallel cable
Part no.:
227769
Herst.Art.Nr.: SPS5000X-PAC
Herst.Art.Nr.: SPS5000X-PAC
Siglent SPL-C1 Logic probe clips for SPL2016
Logic probe clips for SPL2016
Part no.:
227770
Herst.Art.Nr.: SPL-C1
Herst.Art.Nr.: SPL-C1
Siglent LPA10 Active Probe Adapter, work with Lecroy ZD1000 and AP033,compatible with...
Active Probe Adapter, work with Lecroy ZD1000 and AP033,compatible with SDS5000X Series
Part no.:
227747
Herst.Art.Nr.: LPA10
Herst.Art.Nr.: LPA10
Siglent TPA10 SDS5000X Series Active Probe Adapter
SDS5000X Series Active Probe Adapter, Bandwidth 4GHz, support Tektronix TekProbe interface level II.
Part no.:
227748
Herst.Art.Nr.: TPA10
Herst.Art.Nr.: TPA10
Siglent PAK1 Probe Accessories Kit for PB470, PP510, PP215, PP430, SP2030A, SP2035A,...
Probe Accessories Kit for PB470, PP510, PP215, PP430, SP2030A, SP2035A, SP2035
Part no.:
227749
Herst.Art.Nr.: PAK1
Herst.Art.Nr.: PAK1
Siglent PAK2 Probe Accessories Kit for SP3050A
Probe Accessories Kit for SP3050A
Part no.:
227750
Herst.Art.Nr.: PAK2
Herst.Art.Nr.: PAK2
Siglent SAP-ST1 5 pcs in a box, Straight Tip, for SAP1000, SAP2500,
5 pcs in a box, Straight Tip, for SAP1000, SAP2500, SAP2500D;The straight tip is rugged and designed for general probing. Fits in either probe socket.
Part no.:
227751
Herst.Art.Nr.: SAP-ST1
Herst.Art.Nr.: SAP-ST1
Siglent SAP-PT 5 pcs in a box, Pogo Tip,for SAP1000, SAP2500, SAP2500D
5 pcs in a box, Pogo Tip,for SAP1000, SAP2500, SAP2500D;The pogo tip provides z axis compliance. The tip can fit into a socket or via and onto an IC leg.
Part no.:
227752
Herst.Art.Nr.: SAP-PT
Herst.Art.Nr.: SAP-PT
Siglent SAP1-kit Probe kits for SAP1000,SAP2500
Probe kits for SAP1000,SAP2500;including Straight Tip *5, Pogo Tip *5,L In Adapter *1,Z Ground *1,Y Lead Adapter *1,Right Angle Pin Lead 5 cm *1,Straight Pin Lead 6 cm *1,Right Angle Pin Lead 10 cm * 1,Straight Pin Lead12 cm *1, Channel...
Part no.:
227753
Herst.Art.Nr.: SAP1-kit
Herst.Art.Nr.: SAP1-kit
Siglent SAP2-kit Probe kits for SAP2500D
Probe kits for SAP2500D, including Straight Tip *5, Pogo Tip *5,Swivel Tip *2,Tip Saver *2,Y Lead Adapter *2,Right Angle Pin Lead 5
cm * 1,Straight Pin Lead 6 cm * 1,Straight Pin Lead
12 cm * 1,Spring loaded Ground (Short) * 2,Spring...
Part no.:
227754
Herst.Art.Nr.: SAP2-kit
Herst.Art.Nr.: SAP2-kit
Siglent SP3050A 10X attenuation,11 pf,10 Mohm, 500 MHz,CAT ? 400 Vrms,operating...
10X attenuation,11 pf,10 Mohm,
500 MHz,CAT ? 400 Vrms,operating temperature 0 to 50 degrees
Part no.:
227757
Herst.Art.Nr.: SP3050A
Herst.Art.Nr.: SP3050A
Siglent SP3150A 10X attenuation,11 pf,10 Mohm, 500 MHz,CAT ? 400 Vrms,operating...
10X attenuation,11 pf,10 Mohm,
500 MHz,CAT ? 400 Vrms,operating temperature 0 to 50 degrees (SDS6000A only)
Part no.:
227758
Herst.Art.Nr.: SP3150A
Herst.Art.Nr.: SP3150A
Siglent SDS6000-RMK Rack Mount kit for SDS6000A, SNA5000A, SSA5000A; Height 7U
Rack Mount kit for SDS6000A, SNA5000A, SSA5000A; Height 7U
Part no.:
227735
Herst.Art.Nr.: SDS6000-RMK
Herst.Art.Nr.: SDS6000-RMK
Siglent SDS5000X-RMK Rack Mount kit for SDS5000X
Rack Mount kit for SDS5000X
Part no.:
227736
Herst.Art.Nr.: SDS5000X-RMK
Herst.Art.Nr.: SDS5000X-RMK
Siglent SDS2000-RMK Rackmount kit is designed for use with only one instrument
Rackmount kit is designed for use with only one instrument, is compatible with the SDS2000 series Oscilloscope
Part no.:
227737
Herst.Art.Nr.: SDS2000-RMK
Herst.Art.Nr.: SDS2000-RMK
Siglent SDS2000HD-RMK Rack Mount kit for SDS2000X HD; Height 6U(exactly 260mm)
Rack Mount kit for SDS2000X HD; Height 6U(exactly 260mm)
Part no.:
227738
Herst.Art.Nr.: SDS2000HD-RMK
Herst.Art.Nr.: SDS2000HD-RMK
Siglent SDS1000X-E-RMK Rackmount kit , compatible with the SDS1000X-E model
Rackmount kit , compatible with the SDS1000X-E model
Part no.:
227739
Herst.Art.Nr.: SDS1000X-E-RMK
Herst.Art.Nr.: SDS1000X-E-RMK
Siglent SDG-RMK Rackmount kit
Rackmount kit , compatible with the SDG800, SDG1000 ,SDG1000X,SDG2000X,SDG5000 and SDG6000X series function generator and SDM3045X, SDM3055, SDM3065X digital multimeter
Part no.:
227740
Herst.Art.Nr.: SDG-RMK
Herst.Art.Nr.: SDG-RMK
Siglent SDG-2-RMK Rackmount kit for two intruments
Rackmount kit for two intruments , compatible with the SDG800, SDG1000 ,SDG1000X,SDG2000X,SDG5000 and SDG6000X series function generator and SDM3045X, SDM3055, SDM3065X digital multimeter
Part no.:
227741
Herst.Art.Nr.: SDG-2-RMK
Herst.Art.Nr.: SDG-2-RMK
Siglent SSA-RMK Rackmount kit , compatible with the SSA3000X, SSA3000X plus, SSA3000X-R...
Rackmount kit , compatible with the SSA3000X, SSA3000X plus, SSA3000X-R and SVA1000X
Part no.:
227742
Herst.Art.Nr.: SSA-RMK
Herst.Art.Nr.: SSA-RMK
Viewed