Top seller
No results were found for the filter!

10X attenuation,11 pf,10 Mohm,
500 MHz,CAT ? 400 Vrms,operating temperature 0 to 50 degrees (SDS6000A only)
Part no.:
227758
Herst.Art.Nr.: SP3150A
Herst.Art.Nr.: SP3150A

Differential Active Probe, 2.5 GHz
Part no.:
227760
Herst.Art.Nr.: SAP2500D
Herst.Art.Nr.: SAP2500D

Bandwidth: 50MHz; Maximum continuous current 30Arms; Peak current 50A;Switching ratio:5A/30A; Accuracy:5A(±1%±1mA);30A(±1%±10mA); Powered by oscilloscope through SAPBUS interface
Part no.:
227761
Herst.Art.Nr.: SCP5030
Herst.Art.Nr.: SCP5030

Bandwidth: 100 MHz; Maximum continuous current 30 Arms; Peak current 50 A; Switching ratio: 5 A/30; Accuracy: 5 A(±1%±1 mA); 30 A(±1%±10 mA); Powered by oscilloscope through SAPBUS interface
Part no.:
227762
Herst.Art.Nr.: SCP5030A
Herst.Art.Nr.: SCP5030A

Bandwidth: 12 MHz; Maximum continuous current 150 Arms; Peak current 300 A; Switching ratio: 30 A/150 A; Accuracy: 30 A(±1%±10 mA); 150 A(±1%±100 mA); Powered by oscilloscope through SAPBUS interface
Part no.:
227763
Herst.Art.Nr.: SCP5150
Herst.Art.Nr.: SCP5150

Bandwidth: 2 MHz; Maximum continuous current 500 Arms; Peak current 750 A; Switching ratio: 75 A/500 A; Accuracy: 75 A(±1%±10 mA); 500 A(±1%±100 mA); Powered by oscilloscope through SAPBUS interface
Part no.:
227764
Herst.Art.Nr.: SCP5500
Herst.Art.Nr.: SCP5500

For SDG2000X(Standard)
Part no.:
227765
Herst.Art.Nr.: SDG-BNC
Herst.Art.Nr.: SDG-BNC

Alligator clip to banana plug, length 600 mm, black and red as a pair
Part no.:
227766
Herst.Art.Nr.: SPD-Cable-1
Herst.Art.Nr.: SPD-Cable-1

Alligator clip to U type, length 600 mm, black and red as a pair
Part no.:
227767
Herst.Art.Nr.: SPD-Cable-2
Herst.Art.Nr.: SPD-Cable-2

SPS5000X Series cable
Part no.:
227768
Herst.Art.Nr.: SPS5000X-SEC
Herst.Art.Nr.: SPS5000X-SEC

SPS5000X Parallel cable
Part no.:
227769
Herst.Art.Nr.: SPS5000X-PAC
Herst.Art.Nr.: SPS5000X-PAC

Logic probe clips for SPL2016
Part no.:
227770
Herst.Art.Nr.: SPL-C1
Herst.Art.Nr.: SPL-C1

Board integrated with RF components like amplier, mixer, filter for vector network analyzer demonstration
Part no.:
227771
Herst.Art.Nr.: SNA-TB01
Herst.Art.Nr.: SNA-TB01

7.2V 6900mAh, SHS800X, SHS1000X battery
Part no.:
227772
Herst.Art.Nr.: RRC2057
Herst.Art.Nr.: RRC2057

Smart Battery Charger for SHS800X/SHS1000X Series
Part no.:
227773
Herst.Art.Nr.: GSCH4000A
Herst.Art.Nr.: GSCH4000A

SHS800X, SHS1000X current measurement accessory, 600 mA range
Part no.:
227774
Herst.Art.Nr.: SCD600mA
Herst.Art.Nr.: SCD600mA

SHS800X, SHS1000X current measurement accessory, 10 A range
Part no.:
227775
Herst.Art.Nr.: SCD10A
Herst.Art.Nr.: SCD10A

Digital multimeter 30A current shunt-1mV/A, DC ~ 1 kHz ±0.3%, 1 kHz ~ 5 kHz ±5%, 30Vac RMS MAX, 60Vdc MAX (only compatible with SDM series multimters which are 4 1/2 or above)
Part no.:
227776
Herst.Art.Nr.: SCD30A
Herst.Art.Nr.: SCD30A

ONLY for SDM3055-SC and SDM3065X-SC; THIS IS NO UPGRADE KIT.
A multiplexer that provides multi-point measurement capabilities to the SDM3000-SC series of digital multimeters. The scanner features 12 multi-purpose + 4 current channels and...
Part no.:
227777
Herst.Art.Nr.: SC1016
Herst.Art.Nr.: SC1016

3GHz; 12-bit; 4 channels; 20 GSa/s; 500Mpts memory depth; 1,000,000 wfm/s waveform capture rate; 32 Mpts FFT; Eye/Jitter Analysis(opt.); Compliance Test(opt.); 15.6’’ touch screen
Part no.:
227778
Herst.Art.Nr.: SDS7304A H12
Herst.Art.Nr.: SDS7304A H12

4GHz; 12-bit; 4 channels; 20 GSa/s; 500Mpts memory depth; 1,000,000 wfm/s waveform capture rate; 32 Mpts FFT; Eye/Jitter Analysis(opt.); Compliance Test(opt.); 15.6’’ touch screen
Part no.:
227779
Herst.Art.Nr.: SDS7404A H12
Herst.Art.Nr.: SDS7404A H12

Software license for resale - no copyright transfer 50 MHz built-in function generator option (software)
Part no.:
227780
Herst.Art.Nr.: SDS7000A-FG
Herst.Art.Nr.: SDS7000A-FG

MSO function ( software), use with SPL2016 probe
Part no.:
227781
Herst.Art.Nr.: SDS7000A-16LA
Herst.Art.Nr.: SDS7000A-16LA
Viewed