Arduino® MKR Zero (I2S Bus & SD für Sound, Musik & digitale
- stock: 0
- part no.: 140339
- vendor: ARDUINO
- mnufacturer no.: ABX00012
- EAN No.: 7630049200470
- weight: 0.02kg
- warranty: 12 months
- Do you have any questions concerning this product?
Downloads
declaration of conformity EU RoHS und REACH ErklärungMKR Zero
MKR ZERO has an on-board SD connector with dedicated SPI interfaces (SPI1) that allows you to play with MUSIC files with no extra hardware!
Watch out music makers, we’ve got some news for you! We have released two libraries for your enjoyment:
- Arduino Sound library – a simple way to play and analyze audio data using Arduino on SAM D21-based boards.
- I2S library – to use the I2S protocol on SAMD21-based boards. For those who don’t know, I2S (Inter-IC Sound) is an electrical serial bus interface standard for connecting digital audio devices
Produktübersicht
The MKR ZERO brings you the power of a Zero in the smaller format established by the MKR form factor. The MKR ZERO board acts as a great educational tool for learning about 32-bit application development. It has an on-board SD connector with dedicated SPI interfaces (SPI1) that allows you to play with MUSIC files with no extra hardware! The board is powered by Atmel’s SAMD21 MCU, which features a 32-bit ARM Cortex® M0+ core.
Warning: Unlike most Arduino & Genuino boards, the MKRZero runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board.
The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it by a LiPo battery. The battery voltage can also be monitored since a connection between the battery and the analog converter of the board exists.
Technische Spezifikationen
Microcontroller | SAMD21 Cortex-M0+ 32bit low power ARM MCU |
Board Power Supply (USB/VIN) | 5V |
Supported Battery(*) | Li-Po single cell, 3.7V, 700mAh minimum |
DC Current for 3.3V Pin | 600mA |
DC Current for 5V Pin | 600mA |
Circuit Operating Voltage | 3.3V |
Digital I/O Pins | 22 |
PWM Pins | 12 (0, 1, 2, 3, 4, 5, 6, 7, 8, 10, A3 - or 18 -, A4 -or 19) |
UART | 1 |
SPI | 1 |
I2C | 1 |
Analog Input Pins | 7 (ADC 8/10/12 bit) |
Analog Output Pins | 1 (DAC 10 bit) |
External Interrupts | 8 (0, 1, 4, 5, 6, 7, 8, A1 -or 16-, A2 - or 17) |
DC Current per I/O Pin | 7 mA |
Flash Memory | 256 KB |
Flash Memory for Bootloader | 8 KB |
SRAM | 32 KB |
EEPROM | no |
Clock Speed | 32.768 kHz (RTC), 48 MHz |
LED_BUILTIN | 32 |
Full-Speed USB Device and embedded Host |
Herst.Art.Nr.: HV-MWMA
Herst.Art.Nr.: mb_LiPo_mBot
Ready to ship today,
Delivery time appr. 1-3 workdays