Shelly · Unterputz · "Wave i4" · Szenenaktivierer · 12 Aktionen · Z-Wave

Z-Wave™ 4-digital inputs controller for enhanced actions control

Manually activate or deactivate any created scene, run synchronized actions, or execute complex trigger scenarios. 

1. Wave i4 is an input reader device (it does not contain relays).
2. Manually control other Z-Wave devices (e.g. with a multi-button switch)
3. Multi-click – activation of up to 12 actions
4. Extremely low power consumption: < 0.2 W
5. Z-Wave frequency band: 868.4 MHz (CEPT countries)
6. Latest technology: Z-Wave 800 Series
7. Automatic set-up with SmartStart
8. Security 2 Authenticated for the highest level of security
9. Over-the-air firmware updates
10. Works with Z-Wave-certified gateways and over 4,000 Z-Wave devices

A gateway (smart hub) is not included. A gateway (smart hub) is required for the configuration of the device.

WHY WAVE i4?

Replace one of the switches in your room and control any other installed Z-Wave device!

Wave i4 allows you to manually activate or deactivate any created scene, run synchronized actions, or execute complex trigger scenarios. You can use it to control other Z-Wave devices within your network with one push of a button. Due to its retrofit design, it is small enough to fit behind every wall switch. Wave i4 can show the status and control the action of four inputs, offering maximum convenience by enabling manual control of your smart home to all family members.

INTRODUCTION TO Z-WAVE

Shelly Qubino works on Z-Wave

By using Z-Wave, smart home products can seamlessly communicate with each other, regardless of their brand or platform, thanks to a centralized smart hub! Shelly Qubino devices work on the latest Z-Wave chip generation (S800), one of the most popular standardized technologies for smart homes in the world. 

^{Z-wave devices have specific requirements in order to function correctly, such as the necessity to use a supported Z-wave hub. 
For more information, please visit the official Z-wave website: www.z-wave.com}

Works with any Z-Wave gateway

Wave i4 is retrofit and designed to fit behind switches/push-buttons. Once installed, include the device in your Z-Wave network (Z-Wave gateway is required) and control it using your smartphone or tablet. Shelly Qubino devices work with over 4000 Z-Wave certified devices and gateways. 

Functionalities

Z-Wave operated

Include Wave i4 to your Z-Wave network and control it remotely. It‘s compatible with all certified Z-Wave gateways.