Shelly - DIN Rail - "Wave Pro Shutter" - Relay - Shutter actuator - Z-Wave

Professional DIN rail Z-Wave® shutter control with power measurement, 16 A per channel

For home and building automation with remote control of motorised window shutters, roller shutters, blinds or awnings. Can be mounted on a DIN rail in a fuse box. It is recommended that only motors with electronic or mechanical limit switches are used.

• Control of the tilt position (angle) of the blind slats
• Supports pushbuttons/torque switches and toggle switches
• Power measurement
• Only low self-consumption: < 0.3 W
• Z-Wave frequency band: 868.4 MHz (CEPT band)
• Latest technology: Z-Wave 800 series
• Automatic setup with SmartStart
• Security 2 Authenticated for the highest level of security
• Supports over-the-air firmware updates
• Works with Z-Wave certified gateways and over 4,000 Z-Wave devices

*A gateway (smart hub) is not included in the scope of delivery, but is required to configure the device

Why buy the WAVE PRO SHUTTER?

The best solution for new residential and commercial buildings

The Wave Pro Shutter is a relay that supports up to 16 A per channel. It is equipped with an integrated current meter that allows you to control and monitor the consumption of each channel. Various actions, scenarios and schedules can be set to harmonise your environment with your daily activities or business requirements.

INPUT IN Z-WAVE

Shelly Qubino works with Z-Wave

 By using Z-Wave, smart home products can communicate seamlessly with each other thanks to a centralised smart hub - regardless of their brand or platform! Shelly Qubino devices work with the latest Z-Wave chip generation (S800), one of the world's most popular standardised technologies for smart homes.  

^{*Z-Wave devices must fulfil certain requirements in order to function correctly. This includes, for example, the use of a supported Z-Wave hub. You can find more information on the official Z-Wave website: www.z-wave.com}

Works with any Z-Wave gateway

The Wave Pro series is designed for installation on the DIN rail in the fuse box. Once installed, you can integrate them into your Z-Wave network (a Z-Wave gateway is required) and control the connected devices from anywhere using your smartphone or tablet. Shelly Qubino devices work with over 4000 Z-Wave certified devices and gateways. 

HÖCHEST SECURITY

Wave Pro series

The Wave Pro series is equipped with overheating, overpower and overvoltage protection* and is installed in the fuse box (DIN). The Pro series enables complete smart automation without additional cables or wiring and is perfect for residential homes, offices, shops, businesses and production facilities as well as new builds.
* The functions for overcurrent and overvoltage are only available for devices with current measurement.

Functions

Z-Wave controlled

Integrate the Wave Pro Shutter into your Z-Wave network and control it remotely. It is compatible with all certified Z-Wave gateways

.

Control the slat angle

Use the Wave Pro Shutter with your blinds and control the tilt position (angle) of the slats to regulate the amount of light in the room.

Position control

Set the desired position of your blinds, shutters, screens, awnings and other devices driven by bidirectional AC motors.

Associations

Set up direct communication between devices in your local Z-Wave network and set customised actions, even without a hub!

Smart schedules

Create customised schedules based on your daily routine or coordinated with sunrise and sunset (gateway required).

Smart scenes

Combine the Wave Pro Shutter with other Z-Wave devices (gateway required) and set customised scenes.

Technical data