ALLNET Switch full managed Layer2+ 26 Port • 24x GbE • PoE Budget 370W • 22x PoE at • 2x Combo • 2x SFP • 19" • Fanless • JSON API • ALL-SG8626PMJ

Cost-effective 24 port Smart Managed Gigabit Layer-2 switch +4x SFP MiniGbic slots without fan for desktop and 19" rack installation

Highlights:

• 24 port Gigabit Layer2+ switch architecture
• Port 23/24 combo ports for TP or SFP (1G) and port 25/26 SFP (1G) slots
• Supports various PoE management functions, including PoE shedule, PoE PD-Alive, etc.
• Supports SFP DDM & cable diagnostics
• Supports G.8032 ERPS, self-detection time < 20 ms
• Supports 1588 V2.0, transparent clock
• Supports port aggregation
• 4KV &overvoltage protection, 6KV contact/8KV air ESD protection
• Totally fanless, no more annoying noises...  max. 390W budget
• 19"inch bracket or wall/table mounting possible

The new ALLNET ALL-SG8626PMJ switch provides an optimal basis for small and medium-sized workgroups with high network and data traffic and enables fast data transmission in the network. With a total of 22 backward-compatible Gigabit PoE ports, the connected PoE end devices are reliably and powerfully interconnected.

The ALL-SG8626PMJ is also ideal for use in office environments thanks to its fanless design, as no disturbing noise is generated. The switch is Layer 2+ fully managed and therefore supports all necessary standards such as QoS, VLAN, Spanning Tree, IGMP Snooping and Link Layer Discovery Protocol. This ensures the highest level of performance and security in your network.

The robust metal housing is suitable for mounting in a 19“ cabinet as well as for wall mounting. ALL-SG8626PMJ also has 2x SFP miniGBIC slots to connect even remote server/uplink end devices via fibre optic cable.

ALL-SG8626PMJ is a Layer 2+ Full Managed Switch PoE, which provides 24*10/100/1000M RJ45 ports and 4*1G uplink SFP slot ports (2 shared combo), with 24 port PoE with IEEE802.3 af/at standards, single port POE power output up to 30W.

Extensive PoE management function

As a managed PoE switch for CCTV surveillance, wireless and VoIP networks, the ALL-SG8626PMJ has the following special PoE management functions:

• PoE PD alive check
• Timed rebooting of the power supply
• PoE schedule
• Monitoring of PoE utilisation
• Soft reboot PoE non-stop
• Prioritisation of the PoE port feed-in

Intelligent PD alive check for frozen PDs

The ALL-SG8626PMJ industrial PoE switch with 24 ports can be configured to monitor the status of the connected PDs in real time. As soon as the PD stops working and responding, the ALL-SG8626PMJ restarts the power supply to the PoE port and gets the PD up and running again. In addition, reliability is significantly improved by the fact that the PoE port resets the PD power supply, reducing the administrative burden on the administrator.

PoE schedule function for energy saving

To protect the environment, the ALL-SG8626PMJ Ethernet PoE switch can effectively control the power supply in addition to its ability to deliver high wattage. The PoE schedule function helps to enable or disable the PoE power supply for each PoE port during specific time intervals and is a powerful feature that helps SMEs or enterprises to save power and money.

Planned PD restart

The ALL-SG8626PMJ intelligent PoE switch allows each of the connected PoE IP cameras or PoE wireless access points to be restarted at a specific time every week. This reduces the risk of the IP camera or AP crashing due to a buffer overflow.

Redundant ring with fast recovery for critical network applications

The ALL-SG8626PMJ supports redundant ring technology and has a strong, fast self-recovery capability to prevent interruptions and external intrusions. It integrates advanced ITU-T G.8032 ERPS technology, Spanning Tree Protocol (802.1s MSTP) and a redundant power supply system into the customer's industrial automation network to improve system reliability and uptime in harsh factory environments. In a given simple ring network, the data link recovery time can be as fast as 20 ms.

1588 time protocol for industrial computer networks

The ALL-SG8626PMJ is ideal for telecom and carrier Ethernet applications and supports MEF service provisioning and timing-over-packet solutions for IEEE 1588 and synchronous Ether

Strong layer 2 functions

The ALL-SG8626PMJ Layer 2 Ethernet switch can be programmed for advanced Layer 2 switch management functions such as dynamic port link aggregation, 802.1Q tagged VLAN, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), QoS, bandwidth control, IGMP snooping and MLD snooping. By aggregating the supporting ports, the ALL-SG8626PMJ enables the operation of a high-speed trunk group that has multiple ports and also supports fail-over.

Efficient and versatile management methods

For efficient management, the ALL-SG8626PMJ is equipped with console, web and SNMP management interfaces.

With the integrated web-based management interface, it offers a user-friendly, platform-independent management and configuration option.

For text-based management, access is possible via Telnet and the console port.

For standards-based monitoring and management software, it provides an SNMPv3 connection that encrypts the packet contents for secure remote management during each session.

Intelligent PoE switch with SFP DDM function

The ALL-SG8626PMJ supports the SFP DDM (Digital Diagnostic Monitor) function, which allows the network administrator to easily monitor real-time parameters of the SFP transceivers, such as optical output power, optical input power, temperature, laser bias voltage and transceiver supply voltage.

 JSON-Java Script Object Notation API

With the JSON API, the ADMIN can create a special user and grant this user authorisation for JSON. We have focussed on 2 functions that we consider important.

• PoE ON/OFF & LAN Port Enabled/Disabled (for switches with PoE function)
• LAN Port Enabled/Disabled (for switches without PoE)

Technical data: