ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic

ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic
ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic
ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic
ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic
ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic
ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic
product pictures similar, may differ from the product description!

net price plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic housing / "ALL0488v6... more
Product information "ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic"

ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic housing / "ALL0488v6

Highlights:

  • PoE injector according to IEEE802.3af/at with max. power of 30W
  • 2x RJ45 Gigabit Ports
  • PoE Output 55VDC@30W Midspan PoE PIN's 4/5 (+) and 7/8(-)
  • internal power supply unit
  • compact design
  • incl. 1.5m power cable with IEC-C5 to IEC-CEE7 protective contact cable
  • NEW: Wall mounting capable

Intelligent power supply via network without switch

With the ALLNET ALL0488V6 Power over Ethernet Injector you can install your PoE-enabled IP devices such as WLAN access points, VoIP phones and much more absolutely independent of existing power sockets.

For example, WLAN access points can be installed in the most ideal locations in a building without having to worry about power cabling.

Switches that are not PoE-capable can be "retrofitted" with Power over Ethernet at a reasonable price, especially if only a few ports with PoE supply are required. Here, the ALL0488V6 saves the purchase of a PoE switch.

The ALLNET ALL0488V6 supports the IEEE802.3af & IEEE802.3at standard with a maximum power of 30W Watt.

The ALL0488V6 does not need to be configured. It has an RJ45 input socket and an RJ-45 output socket, which is used to connect the switch and terminal device to the PoE injector. The cable length here can be up to 100 meters between switch and terminal device in total, as is usual in Ethernet.

Due to its compact design, the ALLNET ALL0488V6 can be installed very easy. It has an internal power supply and supplies the PoE voltage on pins 4/5 (+) and 7/8 (-).

Technical Details:

Element

Specifikation

Standards:

  • IEEE802.3 10Base-T Ethernet
  • IEEE802.3u 100Base-Tx Fast Ethernet
  • IEEE802.3ab 1000Base-T Gigabit Ethernet
  • Support terminal equipment with IEEE802.3af/at, PoE++
  • RoHS Compliance
  • WEEE Compliance

Ethernet Ports:

  • 1x RJ45 10/100/1000 Mbps for connection to switch or hub
  • 1x RJ45 10/100/1000 for connection to PoE end device

PoE Output:
PoE IEEE802.11af/at, Power pins: 4/5(+) 7/8(-)

Power supply:

100 - 240VAC, internal power supply / Output: 55V/550mA incl. connection cable earth contact on IEC320-C5 "Kleeblat/Micky-Mouse" approx. 80cm length

Power consumption:

30 Watt maximum with connected PoE end device


AC Surge Protection:
  • 1.0KV (5P/5N)
  • L-N 1.2/50 (8/20) Tr/Th us
  • 2.0KV (5P/5N)
  • L-PE 1.2/50 (8/20) Tr/Th us
  • N -PE

Housing:

Plastic housing

Mounting:

Wall-mounted

Dimensions:

length/width/height: 140 x 63 x 33 mm

Environment:

Operating Temperature: 0 ~ 40 °C
Operating Humidity 10% ~ 90% (non-condensing)
Storage Temperature: -20 ~ 90 °C
Storage Humidity: 10% ~ 90% (non-condensing)


EMI:
  • FCC CFR47 Part 15
  • EN55024
  • EN55032

EMS:

  • IEC61000-4-2(ESD) ± 6kV(contact), ±8kV(air)
  • IEC61000-4-3(RS) 10V/m(80MHz~2GHz)
  • IEC61000-4-4(EFT) Power Port: ±2kV; Data Port:±1kV
  • IEC61000-4-5(Surge) Power Port:±1kV/DM, ±2kV/CM
  • IEC61000-4-6(CS) 10V(150kHz~80MHz)

Immunity:
  • IEC60068-2-6(Vibration)
  • IEC60068-2-27(Impact)
  • IEC60068-2-32(Free Fall)

Marks:

CE; FCC

Produktmerkmale:

Einsatzbereich: Indoor
Gehäuse: Kunststoff
Geschwindigkeit Injektor: Gigabit
PoE Leistung: 30W at
Related links to "ALLNET PoE Injector Gigabit PoE & PoE+ (15,4W/30W) / plastic"
Available downloads:
Viewed