ALLNET Switch full managed Layer2+ 18 Port • 16x GbE • PoE Budget 280W • 16x PoE at • 2x SFP • 19" • Fanless • JSON API • ALL-SG8618PM

ALLNET Switch full managed Layer2+ 18 Port • 16x GbE • PoE Budget 280W • 16x PoE at • 2x SFP • 19" • Fanless • JSON API • ALL-SG8618PM
ALLNET Switch full managed Layer2+ 18 Port • 16x GbE • PoE Budget 280W • 16x PoE at • 2x SFP • 19" • Fanless • JSON API • ALL-SG8618PM
ALLNET Switch full managed Layer2+ 18 Port • 16x GbE • PoE Budget 280W • 16x PoE at • 2x SFP • 19" • Fanless • JSON API • ALL-SG8618PM
ALLNET Switch full managed Layer2+ 18 Port • 16x GbE • PoE Budget 280W • 16x PoE at • 2x SFP • 19" • Fanless • JSON API • ALL-SG8618PM
ALLNET Switch full managed Layer2+ 18 Port • 16x GbE • PoE Budget 280W • 16x PoE at • 2x SFP • 19" • Fanless • JSON API • ALL-SG8618PM
product pictures similar, may differ from the product description!

net price plus shipping costs

Expected to be available from 29 December 2024

ALLNET Switch full managed Layer2+ 18 Port • 16x GbE • PoE Budget 280W • 16x PoE at • 2x SFP •... more
Product information "ALLNET Switch full managed Layer2+ 18 Port • 16x GbE • PoE Budget 280W • 16x PoE at • 2x SFP • 19" • Fanless • JSON API • ALL-SG8618PM"

ALLNET Switch full managed Layer2+ 18 Port • 16x GbE • PoE Budget 280W • 16x PoE at • 2x SFP • 19" • Fanless • JSON API • ALL-SG8618PM

Highlights:

  • 16 port Gigabit Layer2+ fully managed switch architecture
  • Supports NWay protocol for speed (10/100/1000Mbps) and duplex mode (half/full) auto-detection
  • Supports back-pressure (half duplex), flow control (IEEE 802.3x and IEEE 802.3az Energy Efficient Ethernet
  • VLAN 4K Static / Port-Based / Tagged Based / Protocol / Voice VLAN / 802.1ad Q-in-Q
  • Link Aggregation static link / LACP / Algorithm MAC based or IP based
  • IGMP Snooping 256 groups IGMP v1/v2/v3, Fast Leave
  • QoS (QoS>QoS multi-label, queue config, QoS mapping)
  • Stormcontrol
  • Totally fanless, no more annoying noises...  max. 280W budget
  • 19"inch bracket or wall/table mounting possible

The new ALLNET ALL-SG8618PMJ switch provides an optimal basis for small and medium-sized workgroups with high network and data traffic and enables fast data transmission in the network. With a total of 16 backward-compatible Gigabit PoE ports, the connected PoE end devices are reliably and powerfully interconnected.

The ALL-SG8618PMJ is also ideal for use in office environments thanks to its fanless design, as no disturbing noise is generated. The switch is Layer 2+ fully managed and therefore supports all necessary standards such as QoS, VLAN, Spanning Tree, IGMP Snooping and Link Layer Discovery Protocol. This ensures the highest level of performance and security in your network.

The robust metal housing is suitable for mounting in a 19“ cabinet as well as for wall mounting. The ALL-SG8618PMJ also has 2x SFP miniGBIC slots to connect even remote server/uplink end devices via fibre optic cable.

Extensive PoE management function

As a managed PoE switch for CCTV surveillance, wireless and VoIP networks, the ALL-SG8626PM has the following special PoE management functions:

  • PoE PD alive check
  • Timed rebooting of the power supply
  • PoE schedule
  • Monitoring of PoE utilisation
  • Soft reboot PoE non-stop
  • Prioritisation of the PoE port feed-in

Intelligent PD alive check for frozen PDs

The ALL-SG8618PMJ industrial PoE switch with 24 ports can be configured to monitor the status of the connected PDs in real time. As soon as the PD stops working and responding, the ALL-SG8618PMJ restarts the power supply to the PoE port and gets the PD up and running again. In addition, reliability is greatly improved by the fact that the PoE port resets the PD power supply, reducing the administrative burden on the administrator.

PoE schedule function for energy saving

To protect the environment, the ALL-SG8618PMJ Switch Ethernet PoE can effectively control the power supply in addition to its ability to deliver high wattage. The PoE schedule function helps to enable or disable the PoE power supply for each PoE port during specific time intervals and is a powerful feature that helps SMEs or enterprises to save power and money.

Planned PD restart

The ALL-SG8618PMJ intelligent PoE switch allows each of the connected PoE IP cameras or PoE wireless access points to be restarted at a specific time every week. This reduces the risk of the IP camera or AP crashing due to a buffer overflow.

Redundant ring with fast recovery for critical network applications

The AALL-SG8618PMJ supports redundant ring technology and has a strong, fast self-recovery capability to prevent interruptions and external intrusions. It integrates advanced ITU-T G.8032 ERPS technology, Spanning Tree Protocol (802.1s MSTP) and a redundant power supply system into the customer's industrial automation network to improve system reliability and uptime in harsh factory environments. In a given simple ring network, the data link recovery time can be as fast as 20 ms.

Strong layer 2 functions

The ALL-SG8618PMJ Layer 2 Ethernet switch can be programmed for advanced Layer 2 switch management functions such as dynamic port link aggregation, 802.1Q tagged VLAN, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), QoS, bandwidth control, IGMP snooping and MLD snooping. By aggregating the supporting ports, the ALL-SG8618PMJ enables the operation of a high-speed trunk group that has multiple ports and also supports fail-over.


Efficient and versatile management methods

For efficient management, the ALL-SG8618PMJ is equipped with console, web and SNMP management interfaces.

With the integrated web-based management interface, it offers a user-friendly, platform-independent management and configuration option.

For text-based management, access is possible via Telnet and the console port.

For standards-based monitoring and management software, it provides an SNMPv3 connection that encrypts the packet contents for secure remote management during each session.


Intelligent PoE switch with SFP DDM function

The ALL-SG8618PMJ supports the SFP DDM (Digital Diagnostic Monitor) function, which allows the network administrator to easily monitor real-time parameters of SFP transceivers, such as optical output power, optical input power, temperature, laser bias voltage and transceiver supply voltage.

JSON-Java Script Object Notation API

With the JSON API, the ADMIN can create a special user and grant this user authorisation for JSON. We have focussed on 2 functions that we consider important.

  • PoE ON/OFF & LAN Port Enabled/Disabled (for switches with PoE function)
  • LAN Port Enabled/Disabled (for switches without PoE)

Technical data:

Model

ALL-SG8618PMJ

Copper Ports

16-10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports

Fibre ports

2-100/1000BASE-X SFP interfaces, supports 100/1000Mbps dual mode

PoE ports

1~16-802.3af/802.3at PoE Injector Ports

Console ports

1 x RS-232-to-RJ45 serial port (115200, 8, N, 1)

Switch architecture

Store-and-Forward

Switch Fabric

36 Gbps/non-blocking

Throughput

26.78 Mpps @64 bytes

Address Table

8K entries

Share Data Buffer

4 Mb

Jumbo Frame

9600 bytes

SDRAM

1Gb

Flash memory

128Mb

Flow control

IEEE 802.3x pause frame for full-duplex

Back pressure for half-duplex

Reset button

>2 sec: Factory default and reset

Power Supply

100~240V AC, 50/60Hz, 4A (max.)

Power consumption

Max. 280 watts/1122 BTU

PoE standards

IEEE 802.3af Power over Ethernet/PSE

IEEE 802.3at Power over Ethernet Plus/PSE

PoE power supply type

Per port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af)

Per port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at)

LED indicators

Power: Green

Solid on- power work normal, off- power disconnected

System: Green

Blink -work normally, solid on- soft work abnormal, fast Blink – soft upgrade

PoE: Yellow

Solid on- PoE work normally, Off- PoE doesn’t work, Blink - PoE overload

10/100/1000T RJ45 interfaces (Port 1 to Port 16): 1000 LNK/ACT (Green) Blink - port connected with data transmission; Solid on- port connected without data transmission

100/1000Mbps SFP Interfaces (Port 17 to Port 18): Green

Blink - port connected with data transmission; Solid on- port connected without data transmission

EMC

Surge Immunity:

4KV Per: IEC61000-4-5

ESD Protection:

ESD Level 4 Per: IEC61000-4-2

EFT Level 4 Per: IEC61000-4-4

Layer2 Functions

Port configuration

Auto-negotiation flow control

Port Mirror: TX/RX/BOTH; Many-to-1 monitor

CPU Mirror

Traffic statistics

Link aggregation

Static link aggregation

LACP (Dynamic Trunk/Static Trunk)

Algorithm based on Source/Destination MAC

Algorithm based on Source/Destination IP

MAC Table

Aging Time

Static MAC address

Dynamic MAC address management

VLAN

4094 Active VLANs

4094 VID

802.1Q Tag VLAN

Port VLAN

Protocol VLAN

MAC VLAN

Voice VLAN

802.1ad Q-in-Q tunnelling

Private VLAN (Protected port)

GARP/GVRP

ACL

256ACLs

L2, L3 e L4

Time-based ACL

IP ACL

MAC ACL

MAC-IP ACL

User-Defined ACL

ICMPv6

Spanning tree

802.1D Spanning Tree Protocol (STP)

802.1w Rapid Spanning Tree Protocol (RSTP)

802.1s Multiple Spanning Tree Protocol (MSTP)

Loop Guard

Root Guard

TC-BPDU Guard

BPDU Guard

BPDU Filter

Ring Protection

<20ms G.8032 ERPS Ring

Fast Ring

Multicast

256 groups

IGMP v1/v2/v3 Snooping, Fast Leave

MLD Snooping

Multicast VLAN

IGMP filter

MVR

Multicast routing

QOS

8 mapping IDs to 8 level priority queues

CoS port-based

CoS 802.1p-based

CoS DSCP-based

Scheduling algorithms SP, WRR, SP+WRR

Storm Control (Broadcast, Multicast, Unknown Unicast)

Bandwidth control per port

SWRR, DWRR for Scheduling

Flow Redirect

Precedence

TOS

Rate limiting (Ingress/Egress)

Stri Priority

Security features

Port Security

MAC address filter

ARP Association (Manual, ARP scanning, DHCP snooping)

ARP protection

AAA

DAI

DoS (Denial of Service)

Classification of packages based on: End.MAC, IP End, TCP / UDP Ports, Protocol Type;

802.1x Authentication (port-based e MAC-based)

TACACS/TACACS+ Authentication

RADIUS Authentication

DHCP Filter

Guest VLAN

SSLv2/SSLv3/TLSv1

SSHv1/SSHv2

Restriction of WEB access based on: IP Address, And. MAC and Port;

Port Isolation

Loopback detection

Management

SNMP v1/v2c/v3 with Full Private MIBs

RMON 4 groups

WEB (HTTP/HTTPS)

CLI (Telnet, Console, SSHv1/v2)

Firmware upgrade via console/web/TFTP

Configuration backup/reload 

Dual firmware

LLDP

Configuration export/import

CDP Aware

OAM (IEEE802.3ah)

CFM (IEEE802.1ag)

sFlow

Other Features

DNS Client

DHCP Relay

DHCP Client

DHCP Snooping

DHCP Option 66

DHCP option 67

DHCP option 82

NTP/SNTP client

UPNP

UDLD

PoE management

Total PoE power budget control

Per port PoE function enable/disable

PoE admin-mode control

PoE port power feeding priority

Per PoE port power limitation

PD classification detection

PD alive check

PoE schedule

Soft-reboot PoE non-stop

Maintenance

Cable Diagnostics

Ping

SFP DDM (Digital Diagnostics Monitoring)

Thermal protection

System log (Local and Remote)

Memory and CPU Monitoring

Layer 3 functions

Static routing

IPv4 Unicast: Static Routing(Software Base)

IPv6 Unicast: Static Routing(Software Base)

IPV6

IPv6 neighbour discovery (ND)

Path maximum transmission unit (MTU) discovery

Internet Control Message Protocol (ICMP) version 6

TCPv6/UDPv6

Ping6

Telnet(v6)

Http/Https

Interface IPV6

ACL IPV6

Dimension

440x290x44.5mm

Weight

4 kg

Working Temperature

-10°C to 45°C

Storage Temperature

-20°C to 70°C

MTBF

50,000hrs

Produktmerkmale:

Anzahl Ports PoE/LAN: 16/0
Belüftung Switch: Lüfterlos
Einsatzort Switch: 19"
Extra Features: JSON-PoE-API
Management: full managed
PoE Budget: <300 Watt
PoE Port Leistung: 30W at
SFP Geschwindigkeit: SFP 1GBit
SFP Port Anzahl: 2
Related links to "ALLNET Switch full managed Layer2+ 18 Port • 16x GbE • PoE Budget 280W • 16x PoE at • 2x SFP • 19" • Fanless • JSON API • ALL-SG8618PM"
Available downloads:
Viewed