ALLNET Media Converter Network & PoE over 2 Wire Set AT

Highlights:

• PoE and power via two-wire
• IEEE802.3af/at
• Data rate max. 200Mbps
• Maximum distance: 500m via two-wire
• DIP switch for power output: 12VDC/2A or PoE
• An optional 48VDC~57VDC power supply is required at the master (see accessories)

Overview

The ALL-MC303P2WIRE set offers you the possibility to establish both data and PoE over a 2-wire connection. The max. Cable length can be max. 500m. The master has to be powered with a power supply and feeds both the slave adapter and the PoE end device at the slave with data and power. The set is suitable for upgrading analog systems through an existing cable infrastructure. The compact size of the media converter is perfect for replacing old door stations with a new IP door station. The ALL-MC303P2WIRE set offers the additional option that the power supply of the respective end device can be done either via PoE or optionally with 12VDC/2A at the slave. This flexibility allows to supply PoE as well as non-PoE end devices with power "provided that the end device can work with 12VDC - example: some surveillance cameras, network building control centers "ALL3419 / ALL4175" etc.".  

Dimension:

Diagram:

Speed and power loss:

ALL-MC303P2WIRE-SET supports extended high-speed data transmission in the network. The data differs depending on the cable type. In addition, the longer the cable, the lower the transmission rate. The following test details are for your information:

The above data are parameters of a one-way network. The tests were carried out under the condition that the cable is not completely removed. There may be differences compared to the practical application of the data. The rate is only used as a reference for the project application.

PoE Power Distance Chart:

Network and power can be transmitted over 2-wire. The total PoE power output is 30 W (at) and can be attenuated when transmitted via cable. The greater the distance, the greater the attenuation.
Power loss and attenuation differ depending on the cable type. The following PoE distance table is for reference only.

Notes: In the above figure, the left vertical coordinate is the PoE output power, the bottom horizontal coordinate is the PoE transmission distance, please compare the horizontal and vertical coordinates at the same time to get the exact corresponding output power.

Technical Details: