TEMA GSM gateway 1x FXS or FXO DIAL-103A Plastic housing, antenna not extendable
net price plus shipping costs
This product is not available at the moment. Delivery time upon request.
- stock: 0
- part no.: 224241
- vendor: TEMA TELECOMUNICAZIONI
- mnufacturer no.: DIAL-103A
- weight: 1kg
- warranty: 24 months
- Do you have any questions concerning this product?
Downloads
data sheet DE data sheet EN manual Handbuch EN EU RoHS und REACH ErklärungHighlights:
• GSM Gateway for both incoming and outgoing calls
• Drastic reduction of fixed network to mobile phone calls costs
• Best choice for calls in remote sites, temporary or mobile offices, crafts and as emergency line
• CLIP service (Caller ID sending)
• DTMF or pulse dialing mode (to support older PABX)
• Inbound and outbound call barring option
• Ring signal regeneration with 25Hz sinusoidal waveform
• GSM signal strength information
• 2.5 mt antenna cable and power supply included / fix not extendable
• Programmable via local phone or remotely, via GSM call or SMS messages
DIAL-103A is a new small-sized GSM Gateway that reduces mobile phone costs from PBX extension or stand-alone applications with a fast ROI (Return On Investment). Using DIAL-103A, users can eliminate mobile cross-network fees as it securely transforms fixed-to-mobile in mobile-to-mobile calls exploiting its Dual-Band GSM Engine. The unit is equipped with a FXS port for connection to PBX, through an analog trunk interface, or to a normal DTMF telephone. DIAL-103A uses a SIM Card which enables the user to call mobile phones at low cost. For incoming calls, using internal GSM engine, DIAL-103A re-routes them to the PBX with modem transmission of the caller identity (CLI presentation).
Completely Plug&Play, very simple to be installed, DIAL-103A allows to monitor the GSM signal strength via DTMF commands. DIAL-103A is programmable via DTMF tones or via SMS.
Main features:
• Built-in GSM Dual-Band 900/1800MHz engine
• Small size unit
• High voice quality
• Plug & Play installation
• Programmable via local phone or remotely, via GSM call, SMS messages
• Conversation time-out for outgoing calls
• Inbound and outbound call barring option
• Possibility of SIM CLI hiding on GSM net- work (CLIR)
• Caller identity service over the wired line (Calling Line Identification Presentation)
• Ring signal regeneration with 25Hz sinusoidal waveform
• Advanced algorithm of echo cancellation
• GSM signal strength monitoring
• Maintenance free
Technical Details:
Radiofrequency section |
|
Built-In GSM module | Dual Band (900/1800MHz) |
Network type | GSM, phase II |
SIM Card | Plug-in, 1.8V - 3V, small |
Transmitter power | 2W/900MHz 1W/1800MHz |
Receiver sensitivity | > - 100 dBm |
Antenna | 50 ?, 2 W |
Antenna cable length | 2.5 mt., bundled |
Telephone section |
|
Connection | RJ 11 for analog trunk interface (PBX) or analog telephone (BCA) |
AC impedance (off-hook) | 600 ? |
Line voltage (on-hook) | 48 VDC |
Line current (off-hook) | 25 mA max Maximum loop resistance : 800 ? |
Ring signal regeneration | 60 VRMS, 25 Hz, 1REN Dialing mode : DTMF + pulse |
Other features |
|
Dimensions (HxWxD) | 30 x 75 x 137 mm |
Operating temperature | 0°C - 45 °C |
Relative umidity | 95% not condensing |
Weight | 500 gr packaged |
Provided power supply | Input 230VAC, 50Hz, Output 12VDC, 1A |