ALLNET ALL-PI2011BP-60W / PoE Injector Industrial 1G TX -> 1

ALLNET ALL-PI2011BP-60W / PoE Injector Industrial 1G TX -> 1
ALLNET ALL-PI2011BP-60W / PoE Injector Industrial 1G TX -> 1
ALLNET ALL-PI2011BP-60W / PoE Injector Industrial 1G TX -> 1
     
Artikelbilder ähnlich, können von der Produkt-Beschreibung abweichen!

net priceplus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

Highlights: 60 Watts, selectable Mode A and Mode B Industrial Gigabit POE Injector with... more
Product information "ALLNET ALL-PI2011BP-60W / PoE Injector Industrial 1G TX -> 1"

Highlights:

  • 60 Watts, selectable Mode A and Mode B
  • Industrial Gigabit POE Injector with voltage booster
  • accept 24 VDC to boost up voltage to 55V for 60Watts application
  • 1x10/100/1000M TX PSE (802.3af/at POE+) TX
  • 1x10/100/1000M TX
  • Operating temp: -40°C to +75°C

Introduction

This Super Voltage Booster --- 60 Watts, high power Single port industrial POE Injector is equipped with our high efficiency ColdDesign technology which allows low input voltage, such as 24/48/56 VDC be boost up to 55VDC to provide 60Watts to 72 Watts power to your security equipment by a 4-pin selectable dip switch. The ColdDesign technology will not only boost up Input Voltage, also reduce the excessive heat problem to a minimum. It accepts the input voltage as low as 24/48 VDC to boost up to 55V to meet IEEE802.3af/at required voltage. This built-in 4 pin dip switches are able to select POE for Mode B or Mode A, to select standard IEEE802.3at 30Watts or high power 36Watts, and to select 2 pair or 4 pair for 30/36Watts or 60/72Watts power output. It is being rigorously tested for your Security, Transportation and Telco application.

Technical Details:

IEEE Standard

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet

IEEE802.3af for POE

IEEE802.3at for POE+

Network Connector :

1xRJ-45 10/100/1000BaseT(X) Data

1xRJ-45 10/100/1000BaseT(X) PSE with POE Output power

Network Cable

UTP/STP Cat.5e or above Cable

EIA/TIA-568 10-ohm (100m)

Protocol

CSMA/CD

LED

PW1(power 1) Green: ON- power good, OFF-power failed

PW2(power 2) Green: ON- power good, OFF-power failed

Mode A : ON-  End Span PD detected

Mode B: ON – Mid Span PD detected

4 Pair: ON – 60W PSE in active mode.

            OFF – 30W PSE in active mode.

POE Pin Assignment

Default: Mode A (End Span) V+, V+, V-, V- for pin 1, 2, 3, 6

DIP switch setting can be changed to Mode B, V+, V+, V-, V- for pin 4, 5, 7, 8

DIP Switch

To select 2 pair (30/36Watts) or 4 pair (60/72Watts)

To select Mode A, or Mode B

To select standard IEEE802.3at 30watts or high power POE 36Watts

Reverse polarity protection

Present

Overload current protection

Present

Power Supply

2 Redundant power source

24V-56V VDC Power Input,

Power Consumption

1 W@24/48 VDC full load, Without POE

POE power

Maximum POE power 72watts at 24/48VDC input

Removable Terminal Block

Provide 4 pin terminal block

Wire range: 0.34mm^2 to 2.5mm^2

Solid wire (AWG):12-24/14-22

Stranded wire(AWG): 12-24/14-22

Torque:5lb-In/0.5Nm/0.56Nm

Wire Strip length: 7-8mm

Operating Temperature

-40° ~ 75° fully tested.

Operating Humidity

5% to 95% (Non-condensing)

Storage Temperature

-40°~85°

MTBF (mean time between failure)

510,304 hrs ( MIL-HDBK-217F) at 25°C

Housing

Rugged Metal, IP30 Protection

Case Dimension (L X W X D)mm

103.5mmx32mmx81.5mm (LxWxD)

Installation mounting

DIN Rail mounting and Wall Mounting

Certifications:

EN55022/24

ITE equipment

EN55011

Industrial, Scientific and Medical (ISM) equipment

Safety

IEC EN60950-1

EMC/EMS 

CE, FCC, VCCI

EMI

FCC Part 15 Subpart B Class A,
CE EN 55022 Class A

EN 50155 / EN 60068-2-6

Vibration

EN 50155 / EN 60068-2-27

Shock

EN 50155 / EN 60068-2-32

Free Fall

Produktmerkmale:

Einsatzbereich: Industrie
Gehäuse: Metall
PoE Leistung: 60
Related links to "ALLNET ALL-PI2011BP-60W / PoE Injector Industrial 1G TX -> 1"
Available downloads:
Viewed