ALLNET ALL-PI2011BP-60W / PoE Injector Industrial 1G TX -> 1

IEEE Standard

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet

IEEE802.3af for POE

IEEE802.3at for POE+

Network Connector :

1xRJ-45 10/100/1000BaseT(X) Data

1xRJ-45 10/100/1000BaseT(X) PSE with POE Output power

Network Cable

UTP/STP Cat.5e or above Cable

EIA/TIA-568 10-ohm (100m)

Protocol

CSMA/CD

LED

PW1(power 1) Green: ON- power good, OFF-power failed

PW2(power 2) Green: ON- power good, OFF-power failed

Mode A : ON-  End Span PD detected

Mode B: ON – Mid Span PD detected

4 Pair: ON – 60W PSE in active mode.

            OFF – 30W PSE in active mode.

POE Pin Assignment

Default: Mode A (End Span) V+, V+, V-, V- for pin 1, 2, 3, 6

DIP switch setting can be changed to Mode B, V+, V+, V-, V- for pin 4, 5, 7, 8

DIP Switch

To select 2 pair (30/36Watts) or 4 pair (60/72Watts)

To select Mode A, or Mode B

To select standard IEEE802.3at 30watts or high power POE 36Watts

Reverse polarity protection

Present

Overload current protection

Present

Power Supply

2 Redundant power source

24V-56V VDC Power Input,

Power Consumption

1 W@24/48 VDC full load, Without POE

POE power

Maximum POE power 72watts at 24/48VDC input