Ubiquiti UniFi Gate Access Starter Kit / (1) Gate Hub / PoE++ adapter / UA-SK-Gate

Preview: Ubiquiti UniFi Gate Access Starter Kit / (1) Gate Hub / PoE++ adapter / UA-SK-Gate

product pictures similar, may differ from the product description!

net price plus shipping costs

Arriving soon. Delivery Date unknown

Call us Mail us

EU RoHS und REACH Erklärung

stock: 0
part no.: 232145
vendor: Ubiquiti
mnufacturer no.: UA-SK-Gate
weight: 0.46kg
warranty: 12 months
Do you have any questions concerning this product?

Control a vehicle gate using the connected intercom and authorise gate access with the... more

Close menu

Product information "Ubiquiti UniFi Gate Access Starter Kit / (1) Gate Hub / PoE++ adapter / UA-SK-Gate"

Control a vehicle gate using the connected intercom and authorise gate access with the number plate unlock when paired with a compatible Protect AI camera*.

(1) Gate hub

(1) Intercom system

(1) PoE++ adapter

(2) 2-wire PoE extender

_{* Note : Number plate recognition is supported by cameras in the Protect AI series, with the exception of 360-degree lenses.}

UA hub gate Mechanical
Dimensions	175 x 126 x 26 mm (6.9 x 5 x 1 inch)
Weight	460 g (1 pound)
Favourite material	Polycarbonate
Mounting	DIN rail (included in the scope of delivery)
Hardware
Network interface	(5) 10/100/1000 Base-T
Power method	PoE++
Max. Power consumption	Without PoE output: 22 W With PoE output: 50 W
PoE input	50 V direct current, 1 A
PoE output	PoE passthrough, (4) PoE, 50 V DC, max. 28 W
Button	(1) Factory reset
Digital input	Gate exit request, gate position, side exit request, side exit position, emergency
Dry output relay	(2) Operator: rated voltage 30 V DC, up to 1 A (1) Aux: rated voltage 30 V DC, up to 1 A
Powered output relay	Side release: 12 V DC, up to 1 A
Operating environment	Indoor use only with the device itself. Outdoor use with waterproof junction box.
Operating ambient temperature	-30 to 60 °C (-22 to 104 °F)
Humidity during operation	5 to 90 % non-condensing
Certifications	CE, FCC, IC
LEDs
PoE input	Pass-through white: Pending acceptance Solid blue: Accepted, device is ready Flashing white/blue: Firmware is being updated
PoE output	Off: Not connected or no data connection. Solid white: Connected and data connection active.
Input connections	Off: No cable. Solid white: Cable connected. Flashing white: Active signal.
Output relay	Off: No cable. Solid white: Cable connected. Flashing white: Relay tripped.
UA intercom system Mechanical
Maße	324.8 x 113.7 x 28.3 mm (12.8 x 4.5 x 1.1 inches)
Weight	Gear: 965 g (2.1 lb) Bracket: 445 g (1 lb)
Handle material	Aluminium alloy, UV-stabilised polycarbonate, glass
Mounting material	Powder-coated stainless steel
Mounting	Wall mount, adapter for gooseneck base (included in the scope of delivery) Surface angle bracket, flush mounting (optional) Sun protection kit (optional)
Weather resistance	IP65
Hardware
Network interface	(1) GbE RJ45 connection
Connectivity	Bluetooth 4.2 NFC
Power method	PoE UL 294 Class 2 power-limited power supply UL 60950-1/62368-1 LPS/PS2 power supply
Supported voltage range	48 V direct current
Max. Power consumption	13W
ESD/EMP protection	Air: ±15kV, contact: ±8kV
Sensors	Proximity sensor ALS sensor
Camera	3264 x 2448, 8 MP H: 79.4°, V: 97.5°, T: 118.2°
Display	177 mm (7") diagonal
Resolution	1024 x 600 (16:9)
Display luminance	Max. 1000 nits (typical)
Touchscreen technology	Capacitive multi-touch
Microphone	Yes
Speaker	(1) 4 Ohm, 2W
LEDs	(1) LCM low temperature indicator: orange (LCM is switched off at temperatures below -25° C, but the system functions normally) (1) LED floodlight (13) LED backlight of the keyboard
Key	(1) Factory reset
NFC frequency	13.56 MHz
NFC read range	< 30 mm
NFC standards	ISO 14443A, 14443B, 15693
NFC technology	NFC tag 1,2,3,4,5 MIFARE Classic MIFARE Plus MIFARE Ultralight MIFARE DESFire
Operating ambient temperature	Gerät: -30 to 60 °C (-22 to 140 °F) Display:* -25 to 60 °C (-13 to 140 °F) *The display is switched off when the ambient temperature is above/below the operating temperature of the display, but other functions remain functional. (Valid from firmware v 1.0.66)
Operating environment	Außen area
Humidity during operation	5 to 90 % non-condensing
Software information	The software version of a product can be checked at https://unifi.ui.com üft.
UL 294 level	First attack: Level I Line safety: Level I Endurance: Level I Standby power: Level I
UL 294 declaration	Compliance with IEEE 802.3 specifications has not been verified under UL 294. The equipment shall comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
Requirements for PoE cabling	The recommended minimum power category is cable 5e. The power category used should correspond to the transmission speed required at the installation site. The minimum conductor cross-section for the connection between PSE or Power Injector and PD is 26 AWG (0.13 mm2 ⁾ for patch cables; 24 AWG (0.21 mm2 ⁾ for horizontal or riser cables.
CAN/ULC-60839-11-1 quality	Note assignment: I
Certifications	CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number and issue date or revision status	UA intercom system, V01
UACC-Extender-2Wire-PoE-Tx/Rx Mechanical
Dimensions	40 x 105 x 25 mm (1.6 x 4.1 x 1 inch)
Weight	PoE input: 77 g (2.7 oz) PoE output: 79 g (2.8 oz)
Housing material	Polycarbonate
Mounting material	Polycarbonate
Hardware
Network interface	(1) 10/100 MbE (1) Homeplug AV
Power method	PoE++
Max. Power consumption	3 W (without PoE output)
PoE input	(1) PoE++, 50 V direct current, max. 1.2 A
PoE output	(1) PoE+, 48 V direct current, 0.72 A
ESD/EMP protection	Air: ±8kV, contact: ±4kV
LED	White
Operating ambient temperature	-10 to 40 °C (14 to 104 °F)
Humidity during operation	5 to 95 % non-condensing
Certifications	CE, FCC, IC
U-PoE++ Specifications
Model	U-PoE++
Dimensions	106 x 63 x 34 mm (4.2 x 2.5 x 1.3 inches)
Weight	210 g
Output voltage	48 V DC at 1.25 A
LAN activity indicator	NO
Gigabit LAN connection	Yes
Remote reset function	NO
Reset button	NO
Nominal voltage	100240 V alternating current at 50/60 Hz
Input current	1.3 A with 120 V alternating current, 0.75 A with 230 V alternating current
Inrush current	<100 A peak at 120 V AC <200 A peak at 230 V AC
Efficiency	85+ %
Output ripple	1% max
Switching frequency	65 kHz
Line control	= 1 %
Load control	= 3 %
2-pair power supply	NO
4-pair power supply	Pins 1, 2, 4, 5 (+) and 3, 6, 7, 8 (-)
AC connection	IEC-320 C6
Data input/PoE	RJ45 shielded socket
&overvoltage protection	Difference and common mode
Clamp protection	11 V data, 60 V current
Max. Surge discharge	1500A (8/20 µs) power
Peak pulse current	36A (10/1000 µs) data
Shunt capacitance	<5 pF data
Response time	<1 ns
Power method	Universal AC input, 100240 V AC, 50/60 Hz
Power supply	Alternating current/direct current
Supported voltage range	100240 V alternating current
Max. PoE+ power per port through PSE	60 W
Operating ambient temperature	0 to 40 °C (32 to 104 °F)
Storage temperature	-30 to 70 °C (-22 to 158 °F)
Humidity during operation	10 to 95 % non-condensing
Certifications	CE, FCC, IC, UL, UKCA, KC, CCC, KC, RoHS
Software
Administrative application	UniFi Access: Version 2.1.5 and higher UniFi Protect: Version 4.0.33 and higher