ALLNET / ALL-LAN-ISO-4kV, Aislador Gigabit LAN/Bloqueador PoE 4kV
- stock: 0
- part no.: 168085
- vendor: ALLNET
- mnufacturer no.: ALL-LAN-ISO-4kV
- EAN No.: 4038816089663
- weight: 0.05kg
- warranty: 24 months
- Do you have any questions concerning this product?
Downloads
declaration of conformity data sheet DE data sheet EN data sheet ES data sheet FR manual EU RoHS und REACH ErklärungHighlights:
- Gigabit Ethernet (10/100/1000MBit/s)
- IEEE 802.3ab compliant
- 4kVrms Dielectric strength
- Galvanic isolation: Creepage distance: 12.8mm, Clearance distance: 12.2mm
- no restrictions on cable length
- ESD protection: suppression of transient overvoltages on the signal lines
- suitable for devices with a supply voltage up to 250 Vrms
- Not suitable for use with PoE devices
- Dimensions 80x58x24mm
Plug&Play - no installation required
Compact and universally applicable
No permanently mounted cables
Robust housing
Suitable for all systems with one network connection
requires no power supply
APPLICATIONS:
DEVICE PROTECTION
Protection of especially valuable devices against hum and surge voltages from the network periphery.
MEASUREMENT TECHNOLOGY
Protection of electrical measuring and monitoring equipment against external and interference voltages from the Ethernet cabling.
POTENTIAL DIFFERENCES (BUILDING SERVICES ENGINEERING)
Prevention of equipotential bonding currents in computer systems which are connected by an Ethernet cabling are galvanically connected to each other over longer distances.
AUDIO
Reduction of low-frequency alternating voltages (network hum), which are caused by the network connection to an imperceptible degree.
Technical Details:
Dielectric strength signal and shield | 5000 V 50/60 Hz over 1 min; 10.000 VDC over 10 s |
Data throughput | 10/100/1000 MBit/s |
Connections | 2x J45 input/output |
Network specifications | IEEE 803.2 from 10/100/1000-BaseT, twisted pair, auto-conf. (behaves completely transparent in the network) |
Material | 94V-0/RoHS compliant/SvHC/REACH |
Product Rating (UL) | Passive, electronic components, insulation level DI (250 VAC/300 VDC) tested at 4 kVAC |
Operating mode | Continuous operation |
Operating time between failures | 0,21x 108 (1 failure in 21,000,000 h) |
ESD | 16 kV |
DC Stress-Test (10 s) | 10 kV |
Return Loss | min. 10 dB |
Insertion Loss | max. 1,3 dB |
Dimensions (mm, LxWxH) | 80 x 58 x 24, ca. 39 g |
Standards | IEC 60601-1 1x MOPP up to 250Vrms (the built-in network transformer) |
Environment | Operation and storage: -40...+70°C 10...75% rel. humidity non-condensing |