ALLNET ALL-SWI8142BP / 4 Port PoE + 2 SFP Gigabit Switch PB

ALLNET ALL-SWI8142BP / 4 Port PoE + 2 SFP Gigabit Switch PB
ALLNET ALL-SWI8142BP / 4 Port PoE + 2 SFP Gigabit Switch PB
ALLNET ALL-SWI8142BP / 4 Port PoE + 2 SFP Gigabit Switch PB
     
product pictures similar, may differ from the product description!

net price plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

Highlights: Super Voltage Booster -- 12V/24V/48VDC Power input Rugged Industrial 6 port... more
Product information "ALLNET ALL-SWI8142BP / 4 Port PoE + 2 SFP Gigabit Switch PB"

Highlights:

  • Super Voltage Booster -- 12V/24V/48VDC Power input
  • Rugged Industrial 6 port Gigabit POE Injector
  • 4x10/100/1000M TX PSE (802.3af/at POE+)
  • 2x100/1000M SFP Slots for MiniGbic Modules
  • Boost Voltage from 12/24/48VDC to 55VDC
  • Voltage input range 12-56VDC, Operating temp: -40°C to +75°C

Introduction

This Super Voltage Booster --- The high power 6 port industrial POE+ Switch is equipped with our high efficiency ColdDesign technology which allows low input voltage, such as 12/24/48VDC be boost up to 55VDC to meet IEEE802.3at requirement. The ColdDesign technology will not only boost up Input Voltage, also reduce the excessive heat problem to a minimum. It accepts the input voltage as low as 12VDC, to be boost up to 55VDC. And it is also equipped with 2 port SFP ber that can be used as ber redundancy, cascaded to your other devices to expand your network application. It is being rigorously tested for your Security, Transportation and Telco application.

Technical Details:

IEEE Standard

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3z 1000Base-X Gigabit Ethernet
IEEE802.3x Flow Control and Back Pressure,

IEEE802.3af for POE

IEEE802.3at for POE+

Switch Architecture

Back-plane (Switching Fabric): 12Gbps

Data Processing

Store and Forward

Flow Control:

IEEE 802.3x Flow Control and Back Pressure

Jumbo Frame

9KB

MAC address Table Size

1K

Packet Buffer Size

1M

Network Connector :

5xRJ-45 10/100/1000BaseT(X) auto negotiation,

4 Giga POE+ 802.3at/af 30W PSE per port
Auto MDI/MDI-X function, Full/Half duplex                                            
2 x SFP 100/1000M BaseX  

Network Cable

UTP/STP Cat.5e or above Cable

EIA/TIA-568 10-ohm (100m)

Fiber Cable (Multi-mode):50/125um,62.5/125um
Fiber Cable (Single-mode): 9/125um

Protocol

CSMA/CD

LED

PW1(Power 1) Green,

PW2(Power 2) Green,

ERR (Fault) Amber,

TX/RJ-45 port:

LNK (Link/Active) Green,

SPD(Speed) 10/100(OFF) ,1000 (Green)

SFP Fiber Per port:

Link (Green)

Active Flash

DIP Switch

DIP 1:   OFF: Port 5 SFP ON (DEFAULT)
              ON: Port 5 SFP OFF
DIP 2:   OFF: SFP 1000M (DEFAULT)

              ON: SFP 100M

Reserve polarity protection

Present

Overload current protection

Present

Power Supply

Redundant Dual DC 12V-56V Power Input

Power Consumption

5.76W@12/24/48 VDC full load, Without POE

Alarm Relay Contact

Relay outputs with current carrying capacity of 1 A @24VDC,  

Relay in short circuit mode when 2 powers are connected. in open circuit mode when only one power supply is connected

POE power

POE power per port 30watts. Maximum 36Watts per port at 12/24/48VDC input

Maximum total power 126Watts at 24VDC and 48VDC power input.

Maximum total power 65W at 12VDC power input

Removable Terminal Block

Provide 2 Redundant power, Alarm relay contact ,6 Pin

Wire range: 0.34mm^2 to 2.5mm^2

Solid wire (AWG):12-24/14-22

Stranded wire(AWG): 12-24/14-22

Torque:5lb-In/0.5Nm/0.56Nm

Wire Strip length: 7-8mm

Operating Temperature

-40° ~ 75° fully tested.

Operating Humidity

5% to 95% (Non-condensing)

Storage Temperature

-40° ~ 85° C

MTBF (mean time between failure)

510,304 hrs ( MIL-HDBK-217F) at 25°C

Housing

Rugged Metal, IP30 Protection

Case Dimension (L x W x D)

142mmx43mmx105mm (LxWxD)

Installation mounting

DIN Rail mounting and Wall Mounting

Certifications:

EN55022/24

ITE equipment

EN50155

Railways Applications Electronic Equipment used on Rolling Stock

EN55011

Industrial, Scientific and Medical (ISM) equipment

EN50121-3-2

Railway Applications – Electromagnetic Compatibility – Part 3-2 Rolling Stock - Apparatus

EN50121-4

Railway Applications – Electromagnetic Compatibility – Part4 Emissions and Immunity of the Signaling and Telecommunications Apparatus

Safety

IEC EN60950-1

EMC/EMS 

CE, FCC, VCCI

EMI

FCC Part 15 Subpart B Class A,
CE EN 55022 Class A

EN 50155 / EN 60068-2-6

Vibration

EN 50155 / EN 60068-2-27

Shock

EN 50155 / EN 60068-2-32

Free Fall

Produktmerkmale:

Anzahl Ports PoE/LAN: 4/1
Belüftung Switch: Mit Lüfter
Einsatzort Switch: Industrial DIN
Extra Features: Power Booster
LAN Geschwindigkeit: 1Gbit/S
Management: unmanaged
PoE Budget: <200 Watt
PoE Port Leistung: 30W at
SFP Geschwindigkeit: SFP 1GBit
SFP Port Anzahl: 1
Related links to "ALLNET ALL-SWI8142BP / 4 Port PoE + 2 SFP Gigabit Switch PB"
Available downloads:
Viewed