ALLNET Switch full managed 16 Port Gigabit 280W / 16x PoE+
- stock: 0
- part no.: 193999
- vendor: ALLNET
- mnufacturer no.: ALL-SG8618PM
- EAN No.: 4038816106278
- weight: 4kg
- warranty: 24 months
- Do you have any questions concerning this product?
Downloads
![](https://shop.allnet.dk/themes/Frontend/ALLNET/frontend/_public/src/img/download_icon_ce.png)
![](https://shop.allnet.dk/themes/Frontend/ALLNET/frontend/_public/src/img/download_icon_datasheet.png)
![](https://shop.allnet.dk/themes/Frontend/ALLNET/frontend/_public/src/img/download_icon_datasheet.png)
![](https://shop.allnet.dk/themes/Frontend/ALLNET/frontend/_public/src/img/download_icon_datasheet.png)
![](https://shop.allnet.dk/themes/Frontend/ALLNET/frontend/_public/src/img/download_icon_datasheet.png)
![](https://shop.allnet.dk/themes/Frontend/ALLNET/frontend/_public/src/img/download_icon_manual.png)
![](https://shop.allnet.dk/themes/Frontend/ALLNET/frontend/_public/src/img/download_icon_manual.png)
![](https://shop.allnet.dk/themes/Frontend/ALLNET/frontend/_public/src/img/download_icon_rohs.png)
There is a successor to this product
Cost-effective 18 port full managed Gigabit Layer-2 switch +2x SFP MiniGbic slots without fan for desktop and 19" rack installation.
ALLNET Switch full managed 16 Port Gigabit 280W / 16x PoE+ / 2x SFP / Fanless / 19" / "ALL-SG8618PM"
Highlights:
- 16 port Gigabit Layer2+ switch architecture
- Supports NWay protocol for speed (10/100/1000Mbps) and duplex mode (half/full) auto-detection
- Supports back-pressure (half duplex), flow control (IEEE 802.3x and IEEE 802.3az Energy Efficient Ethernet)
- VLAN 4K Static / Port-Based / Tagged Based / Protocol / Voice VLAN / 802.1ad Q-in-Q
- Link Aggregation static link / LACP / Algorithm MAC based or IP based
- IGMP Snooping 256 groups IGMP v1/v2/v3, Fast Leave
- QoS (QoS>QoS multi-label, queue config, QoS mapping)
- Stormcontrol
- Total fanless, no more annoying noise... max. 280W budget
- 19 "inch angle or wall/table mounting possible
The new ALLNET ALL-SG8618PM switch is an optimal basis for small and medium workgroups with high network and data traffic and enables fast data transmission in the network. With a total of 16 downward compatible Gigabit PoE ports, the connected PoE end devices are reliably and powerfully interconnected.
Due to the fanless design, the ALL-SG8618PM is also ideal for use in office environments, as no disturbing noise is generated. The switch is Layer 2+ fully managed and supports all necessary standards like QoS, VLAN, Spanning Tree, IGMP Snooping up to Link Layer Discovery Protocol. This ensures highest performance & security in your network.
The robust metal housing is suitable for mounting in a 19" cabinet as well as for wall mounting. The ALL-SG8618PM also has 2x SFP miniGBIC slots to connect remote server/uplink end devices via fiber optic cable.
Rich PoE Management Function
Being the managed PoE switches for CCTV surveillance, wireless and VoIP networks, ALL-SG8626PM features the following special PoE management functions:
- PoE PD-alive check
- Scheduled power rebooting
- PoE schedule
- PoE usage monitoring
- Soft-reboot PoE Non-stop
- PoE port power feeding priority
Smart PoE PD-Alive Check
ALL-SG8618PM managed PoE switch can be configured to monitor connected PD status in real time. Once the PD stops working and responding, ALL-SG8618PM will resume the PoE port power and bring the PD back to work. They will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.
PoE Schedule Function for Energy Saving
For environmental protection purpose, the ALL-SG8618PM switch Ethernet PoE can effectively control the power supply besides its capability of giving high watts power. The PoE schedule function helps to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money.
Scheduled PD Re-starting
The ALL-SG8618PM smart switch PoE allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.
1588 Time Protocol for Industrial Computing Networks
The ALL-SG8618PM is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet.
Strong Layer 2 Features
The ALL-SG8618PM layer 2 Ethernet switch can be programmed for advanced Layer 2 switch management functions such as dynamic port link aggregation, 802.1Q tagged VLAN, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), QoS, bandwidth control, IGMP snooping and MLD snooping. Via the aggregation of supporting ports, the ALL-SG8618PM allows the operation of a high-speed trunk group that comes with multiple ports and supports fail-over as well.
Efficient and Various Management Methods
For efficient management, the ALL-SG8618PMis equipped with console, Web and SNMP management interfaces.
With the built-in Web-based management interface, it offers an easy-to-use, platform-independent management and configuration facility.
For text-based management, it can be accessed via Telnet and the console port.
For standard-based monitor and management software, it offers SNMPv3 connection which encrypts the packet content at each session for secure remote management.
Intelligent PoE Switch SFP DDM Function
The AALL-SG8618PM supports SFP-DDM (digital diagnostic monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
Technical Data:
Model |
ALL-SG8618PM |
Copper Ports |
16-10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
Fiber Ports |
2-100/1000BASE-X SFP interfaces, supports 100/1000Mbps dual mode |
PoE Ports |
1~16-802.3af/802.3at PoE Injector Ports |
Console Ports |
1 x RS-232-to-RJ45 serial port (115200, 8, N, 1) |
Switch Architecture |
Store-and-Forward |
Switch Fabric |
36 Gbps/non-blocking |
Throughput |
26.78 Mpps @64 bytes |
Address Table |
8K entries |
Share Data Buffer |
4 Mb |
Jumbo Frame |
9600 Bytes |
SDRAM |
1Gb |
Flash Memory |
128Mb |
Flow Control |
IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
Reset Button |
>2 sec.: Factory default and reset |
Power Supply |
100~240V AC, 50/60Hz, 4A (max.) |
Power Consumption |
Max. 280 watts/1122 BTU |
PoE Standards |
IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE |
PoE Power Supply Type |
Per Port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af) Per Port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at) |
LED Indicators |
Power: Green Solid on- power work normal, off- power disconnected System: Green Blink -work normally, solid on- soft work abnormal, fast Blink – soft upgrade PoE: Yellow Solid on- PoE work normally, Off- PoE doesn’t work, Blink - PoE overload 10/100/1000T RJ45 Interfaces (Port 1 to Port 16): 1000 LNK/ACT (Green) Blink - port connected with data transmission; Solid on- port connected without data transmission 100/1000Mbps SFP Interfaces (Port 17 to Port 18): Green Blink - port connected with data transmission; Solid on- port connected without data transmission |
EMC |
Surge Immunity: 4KV Per: IEC61000-4-5 ESD Protection: ESD Level 4 Per: IEC61000-4-2 EFT Level 4 Per: IEC61000-4-4 |
Layer2 Functions | |
Port configuration |
Auto-negotiation Flow Control Port Mirror: TX/RX/BOTH; Many-to-1 monitor CPU Mirror Traffic statistics |
Link Aggregation |
Static link aggregation LACP (Dynamic Trunk/Static Trunk) Algorith based on Source/Destination MAC Algorithm based on Source/Destination IP |
MAC Table |
Aging Time Static MAC address Dynamic MAC address management |
VLAN |
4094 Active VLANs 4094 VID 802.1Q Tag VLAN Port VLAN Protocol VLAN MAC VLAN Voice VLAN 802.1ad Q-in-Q tunneling Private VLAN (Protected port) GARP/GVRP |
ACL |
256ACLs L2, L3 e L4 Time-based ACL IP ACL MAC ACL MAC-IP ACL User-Defined ACL ICMPv6 |
Spanning tree |
802.1D Spanning Tree Protocol (STP) 802.1w Rapid Spanning Tree Protocol (RSTP) 802.1s Multiple Spanning Tree Protocol (MSTP) Loop Guard Root Guard TC-BPDU Guard BPDU Guard BPDU Filter |
Ring Protection |
<20ms G.8032 ERPS Ring Fast Ring |
Multicast |
256 groups IGMP v1/v2/v3 Snooping, Fast Leave MLD Snooping Multicast VLAN IGMP filter MVR Multicast Routing |
QOS |
8 mapping IDs to 8 level priority queues CoS port-based CoS 802.1p-based CoS DSCP-based Scheduling algorithms SP, WRR, SP+WRR Storm Control (Broadcast, Multicast, Unknown Unicast) Bandwidth control per port SWRR, DWRR for Scheduling Flow Redirect Precedence TOS Rate Limiting (Ingress/Egress) Stri Priority |
Security Features |
Port Security MAC address filter ARP Association (Manual, ARP scanning, DHCP snooping) ARP Protection AAA DAI DoS (Denial of Service) Classification of packages based on: End.MAC, IP End, TCP / UDP Ports, Protocol Type; 802.1x Authentication (port-based e MAC-based) TACACS/TACACS+ Authentication RADIUS Authentication DHCP Filter Guest VLAN SSLv2/SSLv3/TLSv1 SSHv1/SSHv2 Restriction of WEB access based on: IP Address, And. MAC and Port; Port Isolation Loopback detection |
Management |
SNMP v1/v2c/v3 with Full Private MIBs RMON 4 groups WEB (HTTP/HTTPS) CLI (Telnet, Console, SSHv1/v2) Firmware upgrade via console/web/TFTP Configuration Backup/Reload Dual Firmware LLDP Configuration Export/Import CDP Aware OAM (IEEE802.3ah) CFM (IEEE802.1ag) sFlow |
Synchronization, IEEE1588 |
Support IEEE1588v2 transparent clock |
Other Features |
DNS Client DHCP Relay DHCP Client DHCP Snooping DHCP Option 66 DHCP Option 67 DHCP Option 82 NTP/SNTP Client UPNP UDLD |
PoE management |
Total PoE power budget control Per port PoE function enable/disable PoE admin-mode control PoE port power feeding priority Per PoE port power limitation PD classification detection PD alive check PoE schedule Soft-reboot PoE Non-stop |
Maintenance |
Cable Diagnostics Ping SFP DDM (Digital Diagnostics Monitoring) Thermal protection System log (Local and Remote) Memory and CPU Monitoring |
Layer 3 functions | |
Static Routing |
IPv4 Unicast: Static Routing(Software Base) IPv6 Unicast: Static Routing(Software Base) |
IPV6 |
IPv6 neighbor discovery (ND) Path maximum transmission unit (MTU) discovery Internet Control Message Protocol (ICMP) version 6 TCPv6/UDPv6 Ping6 Telnet(v6) Http/Https Interface IPV6 ACL IPV6 |
Dimension |
440x290x44.5mm |
Weight |
4 kg |
Working Temperature |
-10°C to 45°C |
Storage Temperature |
-20°C to 70°C |
MTBF |
50,000hrs |
Produktmerkmale:
Anzahl Ports PoE/LAN: | 16/0 |
Belüftung Switch: | Lüfterlos |
Einsatzort Switch: | 19" |
Management: | full managed |
PoE Budget: | <300 Watt |
PoE Port Leistung: | 30W at |
SFP Geschwindigkeit: | SFP 1GBit |
SFP Port Anzahl: | 2 |
Herst.Art.Nr.: S215003
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: S215010
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: S215017
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: S215030
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: S215037
Herst.Art.Nr.: S215044
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: S215050
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: S215057
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: S215100
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: S215107
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: S215114
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: S215127
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: S215134
Ready to ship today,
Delivery time appr. 1-3 workdays
![Patchkabel RJ45, 5m grau, CAT5e, S-FTP(SF/UTP), Synergy 21, Patchkabel RJ45, 5m grau, CAT5e, S-FTP(SF/UTP), Synergy 21,](/themes/Frontend/Responsive/frontend/_public/src/img/no-picture.jpg)
Herst.Art.Nr.: S215141
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: S215148
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: S215155
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: S215162
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: S216004
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: S216012
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: S216022
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: S216041
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: S216051
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: S216061
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: S216070
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: S216079
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: S216088
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: EK600SW.2
Herst.Art.Nr.: EK600SW.1
Herst.Art.Nr.: EK600SW.3
Herst.Art.Nr.: S215281
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: OR600ERM1U
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: OR650ERM1UGR
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: OR1000ERM1U
Ready to ship today,
Delivery time appr. 1-3 workdays
Herst.Art.Nr.: OR1500ERM1U
Ready to ship today,
Delivery time appr. 1-3 workdays
Downloads
This Program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; version 2 of the License.
This Program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this Program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
The full text of the GNU General Public License version 2 is included with the software distribution in the file LICENSE.GPLv2
NO WARRANTY
BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
For binaries that you receive from ALLNET GmbH Computersysteme on physical media or within the download of the offered firmware that are licensed under any version of the GNU General Public License (GPL) or the GNU LGPL, you can receive a complete machine-readable copy of the source code by sending a written request to:
ALLNET GmbH Computersysteme
Maistrasse 2
82110 Germering
Your request should include: (i) the name of the covered binary, (ii) the version number of the Allnet product containing the covered binary, (iii) your name, (iv) your company name (if applicable) and (v) your return mailing and email address (if available).
We may charge you a nominal fee to cover the cost of the media and distribution.
Your request must be sent within three (3) years of the date you received the GPL or LGPL covered code.
For your convenience, some or all of the source code may also be found at:
http://www.allnet.de/gpl.html
Dokumentation | |||
![]() |
Dokumentation 04.07.2022 |
ALL-SG8618PM Kurzanleitung (deutsch) |
![]() |
![]() |
Dokumentation 04.07.2022 |
ALL-SG8618PM Kurzanleitung (englisch) |
![]() |
![]() |
Dokumentation 04.07.2022 |
ALL-SG8618PM Benutzerhandbuch (englisch) |
![]() |